NEC NP4001 User Manual page 97

I
TEM
Control Panel Lock
DynamicBlack
(TM)
Remote Sensor
LAN
Settings
Standby Mode
PC Control
Orientation
Orientation enables you to set how the projected image is displayed.
Select from the following:
Desktop Front – Standard forward facing projection (Default setting).
Desktop Rear – Standard rear projection. Enables the projector to produce the image
from behind the screen by reversing the image.
Ceiling Front – Forward facing ceiling mounted projection. Enables ceiling mounted
projection by inverting the image.
Ceiling Rear – Rear ceiling mounted projection. Enables ceiling mounted projection
from behind the screen by inverting and reversing the image.
Downloaded From projector-manual.com NEC Manuals
Set Control Panel Lock On/Off.
Note:
This Control Panel Lock does not affect the remote control
functions.
When the control panel is locked, pressing and holding the
Exit button on the projector cabinet for about 10 seconds.
The setting will change to Off.
DynamicBlack improves the black level of the projector. Black
level is the darkest part of a picture and varies between viewing
devices and environments.
Set DynamicBlack on/off.
Note:
DynamicBlack is only available when Lamp Select is set to
Dual.
Set Remote Sensor fields.
Range: Front/Back, Front, Back
Opens LAN preferences tab (see LAN Settings on page 91).
Select Standby Mode.
Range: Normal and Power-saving
Enables the path selection for PC control.
Select PC Control. Range: PC CONTROL or LAN.
85
5. Using On-Screen Display
D
ESCRIPTION