NEC NP4001 User Manual page 145

Mail
Alert Mail: Click "Enable" to enable Alert Mail feature. This option notifies your computer
of an error message via e-mail when using wired LAN. The error message will be noti-
fied when the projector lamp has reached the end of its usable life or an error occurs in
the projector.
Sender's Address: Specify the sender's address. Up to 60 alphanumeric and symbols
characters can be used.
SMTP Server Name: Type in the SMTP server name to be connected to the projector.
Up to 60 alphanumeric characters can be used.
Recipient's Address 1 to 3: Type in your recipient's address. Up to 60 alphanumeric
and symbols characters can be used.
Apply: Click to apply the settings.
Test Mail
Send a test mail to check if your settings are correct. Click to "Execute" to enable this
feature.
Test Mail Status Button: Click to display the test result.
Sample of a message sent from the projector:
Projector Name: X X X X
Lamp 1 or 2 Hours Used: xxxx [H]
The lamp is at the end of its usable life. Please replace the lamp.
Note:
If you entered an incorrect address in a test, you may not receive an Alert mail.
Should this happen, check if the Recipient's Address is correctly set.
Unless any one of the [Sender's Address], [SMTP Server's Name] or [Recipient's
Address 1-3] is selected, [Test Mail] is not available.
PJLink
This option allows you to set a password when you use the PJLink feature.
On/Off: Enable or disable the password.
Password: Enter a password (up to 32 characters)
Note:
PJLink is a standardization of protocol used for controlling projectors of different
manufacturers. This standard protocol is established by Japan Business Machine
and Information System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
Downloaded From projector-manual.com NEC Manuals
133
8. Specifications