Controls; Power On/Off Switch O / I; E Off / J Button; Button - Siemens TE503...RW Instruction Manual

en de

Controls

Power on/off switch O / I

The power switch O / I (9) is used to switch
the appliance on or to switch it off fully
(power supply off).
Important: Before switching off, run the
cleaning programme or use the
button (12) to switch off.
e
off /

button

j
e
When the off /
briel y, the appliance rinses and switches
off. Pressing and holding down the
button (12) displays the user settings or
starts the descaling and cleaning function.
button
h
Press the button (11) to generate steam
h
for preparing milk froth or warm milk.

start button

Press the start button (10) to begin drink
preparation or to start a service programme.
Press the start button (10) again during
drink preparation to cut the dispensing
process short.

"Coffee strength" rotary knob

This rotary knob (13) is used
to set the coffee strength.
h
Very mild
Mild
Normal
to
Strong
DoubleShot strong+
g
DoubleShot strong++
With these coffee strengths
the coffee is brewed in 2
stages. See "aromaDouble-
Shot" on page 5.
4
Downloaded from CoffeeMachineManual.com Manuals
e
off /
j
button (12) is pressed
j
e
off /

"Drink selection" rotary knob

This rotary knob (14) is used
to select the required drink
and the per-cup quantity. It is
also used to change user
settings.
a
Small Espresso
Espresso
to
Small Café Crème
Café Crème
c
Large Café Crème
j
b
2 small Espresso
2 Espresso
to
2 small Café Crème
2 Café Crème
d
2 large Café Crème
e
Rinse machine
f
Rinse milk system
N.B.: If a drink is selected that cannot be
Invalid combination
prepared,
in the display. Change the coffee strength or
the selected drink.
appears