Unpacking Instructions - Cuisinart PowerPrep Plus EV-14 Series Instruction Booklet

IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
PowerPrep Plus
®
and the standard parts for it:
Work bowl, work bowl cover, large and
small pushers, PowerPrep
blade, metal chopping/mixing blade,
slicing disc, shredding disc, detachable
disc stem for discs, spatula, How-to DVD
and instruction/recipe book.
CAUTION:
THE CUTTING TOOLS HAVE VERY
SHARP EDGES. To avoid injury when
un packing the parts, please follow
these instructions:
1. Place the box on a low table or on
the floor next to the kitchen counter
or table where you intend to keep the
food processor. Be sure the box is
right side up.
2. Remove the cardboard insert and
printed materials. You will see a
rectangular block of plastic foam that
holds the processor parts, each fitted
into a cavity in the foam.
3. The detachable disc stem for the
discs (A) sits in a cavity in one corner
of the foam block. Remove this first.
4. The pusher assembly, with large and
small pushers (B), sits in the adjacent
cavity. Remove this next.
5. The PowerPrep
(C) rests in a cavity on the opposite
side of the foam block. Remove it
from the foam.
6. The plastic spatula (D) is on one long
side of the foam block. Remove it
next.
7. The slicing disc (E) is on the edge
of one of the long sides of the foam
block; the shredding disc (F) is on the
other side. SLIDE THEM OUT WITH
GREAT CARE; THE BLADES ARE
VERY SHARP.
3
®
14-Cup Food Processor
metal dough
®
metal dough blade
®
8. Lift out the DVD from its space on
one side of the foam block.
9. Lift out the foam block.
10. The housing base with work bowl,
metal blade and cover is at the
bottom of the box. The metal blade
is loose in the work bowl beneath a
foam insert.
Do not reach into feed tube. Do not
turn over work bowl without first
removing metal blade.
11. Remove the base and bowl assembly
together by grasping the bowl handle
with one hand and bottom of base
with the other hand.
Do not rotate the bowl clockwise on
the base. This will cause the bowl to
separate from the base.
12. Place the food processor on the
counter or table. Remove foam
cylinder insert from top of metal
chopping blade. Read the instructions
thoroughly before using the machine.
13. Save the shipping cartons and plastic
foam blocks. You will find them
very useful if you need to repack
the processor for moving or other
shipment.
Please watch the enclosed How-to DVD
before using the food processor.