Table of Contents
Advertisement
Available languages
Available languages
OPERATION:
COLOUR BLENDING
Press the MODE button repeatedly until "FA00" appears in the display.
Now the light is in colour blending mode. Afterwards, press ENTER and
then use the UP and DOWN buttons to select the function 7 colours "FA00"
or stroboscope "FF00". To set the colour blending and stroboscope rate
(00 - 99), press ENTER again and then use the UP and DOWN buttons to
change the values. Press ENTER again to confirm.
Note: Both functions can also be used simultaneously.
7 COLOURS
Rate 00 - 99
STROBE
Rate 00 - 99
AUTO MODE
Press the MODE button repeatedly until "AUTO" appears in the display.
In this operating mode, the light switches automatically between colour
change and colour blending mode. The colour change and/or colour
blending rate is determined by the settings of the respective mode.
SLAVE MODE
Press the MODE button repeatedly until "SLAV" appears in the display.
Connect the slave and the master unit with a DMX cable. Now the slave
unit follows the master unit. Confirm with ENTER.
9
Advertisement
Table of Contents
