Quitting The System - Pioneer DDJ-RZ Operating Instructions Manual

4 CD, USB selector switch
5 TRIM control
6 ISO (HI, MID, LOW) controls
7 Headphones CUE button
8 Channel fader
9 HEADPHONES MIXING control
a HEADPHONES LEVEL control
b Crossfader assign selector switch
c Crossfader
d MASTER LEVEL control
e MASTER CUE button
f BOOTH MONITOR control
g CROSS FADER CURVE control
1 Set the positions of the controls, etc., as shown below.
Names of controls, etc.
MASTER LEVEL control
CD, USB selector switch
TRIM control
ISO (HI, MID, LOW) controls
Channel fader
Crossfader assign selector switch
2 Press the [f] button to play the track.
3 Turn the [TRIM] control.
Adjust the [TRIM] control so that the channel level indicator's orange indicator
lights at peak level.
4 Move the channel fader away from you.
5 Turn the [MASTER LEVEL] control to adjust the audio level
of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level.
g
Position
Turned fully counterclockwise
[USB] position
Turned fully counterclockwise
Center
Moved forward
[THRU] position
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc.
HEADPHONES MIXING control
HEADPHONES LEVEL control
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate level.
Note
This unit and rekordbox dj include many functions to allow for more individu-
alistic DJ performances. For details on each function, see the rekordbox soft-
ware's manual.
! The rekordbox software's manual can be downloaded from rekordbox.com. For
details, see Downloading the rekordbox software manual (p. 29 ).

Quitting the system

1 Quit rekordbox.
2 Press the [u] switch on this unit's rear panel to set this
unit's power to standby.
3 Disconnect the USB cable from your computer.
Position
Center
Turned fully counterclockwise
15
En