Pioneer DDJ-RZ Operating Instructions Manual page 10

v GRID ADJUST button
Press:
When the jog dial is turned while pressing the [GRID ADJUST] button, the beat
grid interval can be adjusted.
[SHIFT] + press:
Halves the interval for beat grids.
w SLIP button
Press:
Turns the slip mode on and off.
= Using the slip mode (p. 18 )
[SHIFT] + press:
This switches the vinyl mode on/off.
x SLIP REVERSE button
Press:
Performs reverse playback only while pressed.
Slip reverse play is automatically canceled after 8 beats have elapsed even if the
[SLIP REVERSE] button is kept pressed. The playback returns to normal after
reverting to the background.
[SHIFT] + press:
Switches between forward playback and reverse playback.
y FX PANEL button
Press:
(During normal operation)
Switches [FX] panel display.
(During standby status)
The standby mode is canceled.
[SHIFT] + press:
Displays or hides [SAMPLER] panel display.
Mixer section
1 3 2 2
p
q
n
m
l
k
j
i
s
h
g
f
x
e
y
z
1 OFF, ON, TALK OVER selector switch
Turns the microphone on/off.
2 USB connection indicator
Displays the connection status between the USB-A terminal and USB-B
terminal.
Lights: When the computer is connected to the terminal and the driver is
installed
Flashes: When the computer is connected to the terminal and the driver is not
installed
Lights out: When the computer is not connected to the terminal
10
En
4 o o 3 2 2 4
q q q
r r r r
t t t t
u u u u
s s s
v v v v
w w w w
x x x
y y y
A
3 USB (A) button
When lights, the USB-A terminal is used in communication with the computer.
! The [USB (A)] button and [USB (B)] button located at the left side are used to
control the USB communication for deck 1 or deck 3. The [USB (A)] button
and [USB (B)] button located at the right side are used to control USB com-
munication for deck 2 or deck 4.
! When the [USB (A)] button or [USB (B)] button located on the left side is
flashing, it means the deck 1 or deck 3 audio is on air. Flashing stops when
the channel fader of deck 1 or deck 3 is moved to the frontmost position.
When the [USB (A)] button or [USB (B)] button located on the right side is
flashing, it means deck 2 or deck 4 audio is on air. Flashing stops when the
channel fader of deck 2 or deck 4 is moved to the frontmost position. (When
the USB terminal is switched, sound is also switched instantaneously.
Therefore, when the button is flashing, before switching the USB terminal,
make sure that the deck is not used by another user.)
4 USB (B) button
When lights, the USB-B terminal is used in communication with the computer.
! The [USB (A)] button and [USB (B)] button located at the left side are used to
control the USB communication for deck 1 or deck 3. The [USB (A)] button
and [USB (B)] button located at the right side are used to control USB com-
munication for deck 2 or deck 4.
! When the [USB (A)] button or [USB (B)] button located on the left side is
flashing, it means the deck 1 or deck 3 audio is on air. Flashing stops when
the channel fader of deck 1 or deck 3 is moved to the frontmost position.
When the [USB (A)] button or [USB (B)] button located on the right side is
flashing, it means deck 2 or deck 4 audio is on air. Flashing stops when the
channel fader of deck 2 or deck 4 is moved to the frontmost position. (When
the USB terminal is switched, sound is also switched instantaneously.
Therefore, when the button is flashing, before switching the USB terminal,
make sure that the deck is not used by another user.)
5 MASTER LEVEL control
Adjusts the master sound level output.
6 MASTER CUE button
Turns monitoring of the master output's sound on and off.
7 Master level indicator
Displays the master output's audio level.
8 BOOTH MONITOR control
Adjusts the level of audio signals output from the [BOOTH OUT] terminal.
5
p 9 MASTER OUT COLOR control
6
Changes the SOUND COLOR FX parameter applied to the master output sound.
a OSC SAMPLER SELECT button
Generates oscillator sound (NOISE, SINE, SIREN, and HORN).
7
= Using the oscillator function (p. 22 )
b OSC SAMPLER VOLUME control
Adjusts the sound level of oscillator sound.
8
c OSC SAMPLER PARAMETER control
Adjusts the quantitative parameters of oscillator sound.
9
d SOURCE selector switch
a
Selects the oscillator sound source.
e HEADPHONES LEVEL control
b
Adjusts the sound level output from the headphones.
f HEADPHONES MIXING control
c
Adjusts the balance of the monitor volume between the sound of the channels
for which the headphones [CUE] button is pressed and the sound of the master
d
channel.
g SOUND COLOR FX buttons
These turn the SOUND COLOR FX effects on/off.
h MIC COLOR control
Changes the parameter of SOUND COLOR FX applied to microphone sound or
sampler sound.
i SAMPLER SYNC button
Press:
Switches between synchronizing and not synchronizing (SYNC ON/OFF) the
sampler sound to the tempo of the master deck.
[SHIFT] + press:
Sets the sampler sound source as the master for the beat sync function.
j SAMPLER CUE button
Press:
Turns monitoring of the sampler sound on or off.
[SHIFT] + press:
Calculates the BPM value used as the base for the sampler from the interval at
which the button is tapped with a finger. (Tap function)