Mercury HP700 SCi Manual page 82

3. Insert the hose end of the crankcase oil pump into an
appropriate container and pump out the oil until the crankcase
is empty.
a - Crankcase oil pump
b - Crankcase oil pump hose
4. Remove the crankcase oil pump.
5. Place a container below the oil filter.
6. Remove the oil filter from the adaptor and discard the old oil
filter and old sealing ring.
7. Coat the sealing ring on the new filter with new motor oil and
install the new sealing ring and filter.
MAINTENANCE
a
74
b
10460