Mercury HP700 SCi Manual page 86

5. Remove the bilge plug. The oil drain hose is tethered to the
plug.
a
a - Bilge drain plug
b - Tether
c - Oil drain plug
6. Pull the oil drain hose through the bilge drain flange.
7. Place an appropriate container directly under the oil drain
hose.
8. Using two wrenches, separate the oil drain hose plug from the
oil drain hose and allow crankcase oil to drain until empty.
9. Place a container below the oil filter.
10. Remove the oil filter from the adaptor and discard the old oil
filter and sealing ring.
MAINTENANCE
b
c
d - Bilge drain flange
e - Oil drain hose
78
e
d
6150