Olympus E-30 Basic Manual page 56

NDynamic-single target AF mode
If the camera cannot focus on the subject using the
selected AF target, the camera focuses using the adjacent
AF target.
Direct button
• When the button is released, the currently selected AF
target lights. When M or N is set, you can select the
3
AF target to be used at that point. For operation, refer to
Step 2 in "Selecting the AF target position" (gP. 56)
in the next section.
Super control panel
• When M or N is set, you can turn the dial to select
the AF target.
Menu
• When M or N is set, you can select the AF target with p.
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1
Press the P button and release your finger to enable selection of the AF target.
2
Use the main dial/sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac, and use the sub dial to perform the same
operation as bd.
• Press the i button to return the position of the AF target
to the center.
TIPS
Selecting the operation when the AF target is selected:
j You can change the operation of the dials and arrow pad for selecting the AF target. g"P
SET UP" (P. 94)
Selecting the position of the AF target with the arrow pad without pressing the P
button:
j Press the shutter button halfway and release it, then use the arrow pad to change the position of
the AF target. g"n FUNCTION" (P. 97)
x
Notes
56 • When [LIVE VIEW AF MODE] is set to [IMAGER AF] or [HYBRID AF], you cannot use the
dynamic-single target AF mode.
EN
Selected AF
target
P + j/k
i p: [AF AREA]
P + k
MENU [X] [AF AREA]
k
P button
j
i button
MENU button