Wps - D-Link DIR-816L User Manual

DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual

WPS

On pages of the Wi-Fi / WPS section, you can enable the function for secure configuration of the
WLAN and select a method used to easily add wireless devices to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
If the router's WLAN is splitted into parts (the value 2 , 3 , or 4 is selected from the
!
MBSSID drop-down list on the Wi-Fi / Basic settings page), the WPS function can be
used only for the first part of the WLAN (the first value from the BSSID drop-down list).
Before using the function you need to configure one of the following authentication types:
Open with no encryption, WPA2-PSK , or WPA-PSK/WPA2-PSK mixed with the
!
AES encryption method (on the relevant band page of the Wi-Fi / Security settings
section). When other security settings are specified for the band of the WLAN, controls of
the Wi-Fi / WPS page of the relevant band are not available.
Figure 126. The page for configuring the WPS function.
Page 153 of 304
Configuring Device (Router Mode)