D-Link DIR-816L User Manual page 164

DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
To view the latest data on the available
the Wireless networks in 5 GHz range section.
To connect to a wireless network from the list, select the needed network. Upon that the relevant
values are automatically inserted in the SSID, BSSID, and Network Authentication fields.
For the Open authentication type with no encryption, click the Apply button.
For the Open authentication type with encryption and the Shared authentication type, select a
needed value from the Default Key ID drop-down list. If needed, select the Encryption Key
WEP as HEX checkbox to set a hexadecimal number as a key for encryption. Then select a needed
value in the WEP key length drop-down list, fill in 4 Encryption Key WEP fields, and click the
Apply button.
For the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication types, fill in
the Encryption Key PSK field and click the Apply button.
After clicking the Apply button, the wireless channel of DIR-816L will switch to the channel of the
wireless access point to which you have connected.
If the router is connected to the selected network successfully, the green indicator appears to the
right of the network's SSID in the table.
The step-by-step description of how to configure the router as a wireless client is available on
D-Link website. To access it, click the Configuring router in wireless client mode link in the
top part of the page.
5GHz band wireless networks, click the Search button in
Page 164 of 304
Configuring Device (Router Mode)