In The Box; Further Reading - Taser 26810 User Manual

ARC switch.
When the TASER CAM HD AS recorder is used with the X26P CEW, shut down will occur 5 seconds after you press
the trigger.
Note: The TASER CAM HD AS feature has no impact on video and audio recording; however the audio alert will be
captured on the recording and may distort any audio captured from the incident during the duration of the
audio alert. As long as the safety switch is in the up (ARMED) position, the TASER CAM HD AS will continue
to capture the event.
Under stressful situations, audio exclusion might prevent you from hearing the alert from the automatic
shut-down TASER CAM HD recorder.
Your CEW recognizes the TASER CAM HD AS as a unique type of battery pack which enables the automatic shut-
down feature of the CEW. The CEW will indicate that this feature is enabled via a special TASER CAM HD AS icon in
the upper left hand corner of the CEW CID as shown below:
Remove the cartridges before testing the CEW function. See the applicable CEW user manual for more in-
formation.

In the Box

Your TASER CAM HD system includes a wall charger assembly. A USB download cable is available separately.

Further Reading

For information on the transferring videos to your computer, uploading videos to Evidence.com, or updating the
firmware in your TASER CAM HD recorder, see the Evidence Sync User Manual.
For information on CEW operation and safety, see the TASER X2 CEW User Manual or the TASER X26P CEW User Man-
ual, as appropriate.
This feature is automatically disabled if replaced by another battery pack type, and
the CEW will return to its normal configuration—that is, there will no longer be an
audio alert, and the energy cycle will continue after 5 seconds if your finger is still
holding down the trigger (or ARC switch, in the case of an X2 CEW). Always confirm
that the CEW performs as expected before returning it to duty after changing any
battery pack.
Wall Charger
TASER CAM HD Recorder User Manual
TASER CAM HD
Chapter 2: General Overview
5