GE TCX22 Use And Care Manual page 16

REHANG FRESH FOOD DOOR
food door onto
the center hinge
pin.
b. Tilt the door
towards the
lifting
cabinet,
the top hinge so the pin fits into the socket on
the top of the door.
c. Tighten the top hinge screws
door, making sure the top edge of the door is
even with the top surface of the cabinet.
CAUTION: Do not loosen the center hinge bracket. To do so could cause both doors to fall
away from the cabinet.
Fresh Food Door: Loosen the top hinge screws. Adjust the door so it is flush with the cabinet.
Tighten screws.
PROBLEM
REFRIGERATOR
DOES NOT OPERATE
MOTOR STARTS &
STOPS FREQUENTLY
VIBRATION OR
RATTLING
16
I
to secure the
QUESTIONS?
USE THIS PROBLEM SOLVER
POSSIBLE CAUSE
May be in defrost cycle. Wait for about 30 minutes. If lights work but the unit
does not restart, remove the base grille. Locate the defrost timer mounted on the
center rail and turn the timer knob clockwise until you hear a click. The
refrigerator should begin operating.
Temperature control is in the OFF position.
If the interior light is not on, refrigerator may not be plugged in at the
wall outIet.
small appliance into the same outlet to determine if there is a tripped circuit
breaker or burned out fuse.
Temperature control starts and stops motor to maintain even temperatures.
If refrigerator vibrates, more than likely it is not resting solidly on the floor and
front roller screws need adjusting, or ffoor is weak or uneven. Refer to ROLLERS.
If dishes vibrate on shelves, try moving them. Slight vibration is normal.
TRANSFER ICE COMMITMENT
(on models so equipped)
a. Remove the ice trays and the bin.
ice compartment off the screws.
b. Remove the screws
plugs in the opposite wall.
c. Reinstall ice compartment.
Lift the
and switch with plastic