Controlling Your Tv With The Supplied Remote - Sony DVP-NS700H Operating Instructions Manual

Controlling Your TV with the
Supplied Remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
VOL +1-
() () ()
You can control your TV using the buttons
below.
By pressing You can
TV
I/C>
Turn the TV on or off
VOL +1- Adjust the volume of the TV
TVIVIDEO Switch the TV's input source
between the TV and other
input sources
• Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If
your TV is listed in the table below, set the
appropriate manufacturer's code.
1
While holding down TV I/C), press the
number buttons to select your TV's
manufacturer's code (see the table
below).
2
Release TV
I/C).
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code number
Sony 01 (default)
Daewoo 04,22
Hitachi 02,04
JVC
09
LG/Goldstar 04
MGNMitsubishi 04,13
Panasonic
19
Philips 21
RCA 04,10
Samsung 04,20
Sharp
18
Toshiba 07, 18
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
• Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.