Sony DVP-NS700H Operating Instructions Manual page 61

• YCBCR/RGB (HOMI)
Selects the type of HOMI signal output from
HOMI OUT jack.
You cannot select this when "PhotoTV HO"
mode is activated (page 50).
• LANGUAGE FOLLOW
Switches the languages of the OVO player
to the same as the current TV OSO
language.
You cannot select this when "CONTROL
FOR HOMI " is set to "OFF."
RGB
Outputs YCBCR signals.
Outputs RGB signals.
ON
OFF
Switches this function on.
Switches this function off.
• If the playback picture becomes distorted, set this
setting to "ROB."
• If the HOMI OUT jack is connected to equipment
with a OVI jack, "ROB" signals will be
automatically output even when you select
"YCsCR".
• AUDIO (HOMI)
Selects the type of audio signal output from
the HOMI OUT jack.
AUTO
Normally, select this. Outputs
- -
audio signals according to the
"DIGITAL OUT" settings
(page 58).
peM
Converts Dolby Digital, or
96 kHz/24 bit PCM signals to
48 kHz/16 bit PCM.
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DlOITALlOTS signals and "AUTO"
is selected. In this case, select "PCM."
• CONTROL FOR HOMI
Switches the CONTROL FOR HDMI setting
on or off.
OFF Switches this function off.
- -
ON
Allows you to use the
CONTROL FOR HDMI
features (page 17).
When you change this function from "OFF" to
"ON" on a Sony TV that is compatible with the
CONTROL FOR HOMI function, all compatible
devices will change to "ON" automatically, or vice
versa. For more details, refer to the operation
instructions supplied with the TV.
• Tum off any display before using this function.
• The OSO language for player keeps if the TV's
language cannot be supported.
(I)
CD
~
::::lI
ICI
tn
l»
::::lI
=-
):10
=-
_.
C
tn
3
CD
::::lI
-
t n