Burner Identifi Cation/Verifi Cation - HEAT GLO SL-3X Installation Manual

F. Burner Identifi cation/Verifi cation
The burner may be accessed for identifi cation and veri-
fi cation purposes. This task should be performed by a
qualifi ed service technician. The logs and burner must be
removed to see these identifi cation marks. Disconnect
the pilot from the burner before removal. See Figure 9.2
for burner identifi cation chart. Notch patterns are located
on bottom side of burner.
DETAIL A
SL-3X
SL-5X
SL-7X
SL-9X
Figure 9.2 Burner Identifi cation
52 Heat & Glo • SL-3X, SL-5X, SL-7X, SL-9X Installation Manual • 2372-980 Rev. C • 8/16
NG /LP