Self-Timer; Setting The Beep Sound - Olympus CAMEDIA D-200L Instructions Manual

SELF-TIMER

1
Press the Self-Timer button. The Self-Timer indicator is
displayed on the control panel.
Use a tripod to hold the camera securely.
2
Aim at your subject, and press the shutter release button.
The shutter will be released about 12 seconds after the
shutter release button is pressed.
<Make sure>
The focus (D-300L only) and exposure lock when the
shutter release button is depressed halfway.
The Self-Timer is disengaged when the shutter is
released.
To cancel the Self-Timer after it has been activated,
press the Self-Timer button again or close the lens cover.
R

SETTING THE BEEP SOUND

How to set the beep sound
Press and hold the Flash mode button and open the lens
cover at the same time.
• If you hear a single beep, the beep sound is set to ON.
• If the camera makes no sound, the beep sound is set to
OFF.
<Make sure>
The beep sound setting is not affected when the
batteries are unloaded.