Adjusting The Screen Layout - Huawei TE40 User Manual

HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint
User Guide
Step 1 Select
Step 2 Select a camera preset number and press
camera.
----End
Deleting a Camera Preset
To delete a camera preset, select the preset number and press

8.3 Adjusting the Screen Layout

By adjusting the screen layout, you can view multiple videos on the same monitor. Only the
main output port supports combined picture output
To adjust the screen layout, use either of the following methods:
l
l
Figure 8-1 Screen layouts
Issue 02 (2014-01-15)
and select Switch Preset.
When the endpoint is not in use in a conference, press
between the full screen, Picture in Picture (PiP) and two-pane (larger pane on the left, larger
pane on the top, or two panes in the same size) modes. When the endpoint is in use in a
conference, press on the remote control to switch between the full screen, PiP, two-
pane (larger pane on the left, larger pane on the top, or two panes in the same size), and
three-pane modes.
When the endpoint is in use in a conference, select
desired layout from the following:
– Remote video in full screen
– Local video in full screen
– Combination of the local video, remote video, local presentation, and remote
presentation in PiP, two-pane, or three-pane mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Controlling What You See
on the remote control to apply that preset to the
on the remote control.
on the remote control to switch
from the option bar and select a
39