Changing The "Picture" Setting - Sony KV-AR252M61 Trinitron Service Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press MENU.
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "Mode"), then press
Select
"Mode"
"Color Temperature"
"VM"
(Velocity Modulation)
"3D Intelligent Picture"
* You can adjust the setting to your personal preference in the "Picture Adjustment" ,
"Color Temperature" and "VM" options only when the "Personal" mode is selected
(see page 18).
Note
• "3D Intelligent Picture" is available only for PAL and NTCS 3.58 color systems through 8
antenna and video input terminals. For NTSC 3.58 color system, "3D Comb Filter : On" or
"3D–NR : On" display will appear. For PAL color system, Digital Comb Filter and 3D-NR are
also available.
) is
.
To
choose either "Dynamic", "Standard", "Soft" or "Personal"*
(see page 11).
adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
sharpen the edges of each object.
Choose either "High", "Low" or "Off".
optimize picture quality.
Automatically, the picture will become clearer and sharper if
the signal is good and noise will be reduced if the signal is
noisy.
Press V or v to select "On", then press
To cancel, select "Off", then press
Picture
Mode: Dynamic
Picture Adjustment
Color Temperature: Cool
VM:
High
3D Intelligent Picture: On
Select Confirm
.
.
.
continue
Menu Adjustment
End
17