1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV
  5. TRINITRON KV-AR29M90
  6. Service manual

Sony TRINITRON KV-AR29M90 Service Manual

Bg3r chassis
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Sony TRINITRON KV-AR29M90

Summary of Contents for Sony TRINITRON KV-AR29M90

  • Page 2 REVISION HISTORY BG3R CHASSIS MODEL 9-872-312-01 PART NO. : KV-AR29M90 SUFFIX DATE SUPPL. / CORR DESCRIPTION 2002/5 1st. Issue...
  • Page 3 SERVICE MANUAL BG3R CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KV-AR29M90 RM-993 Hong Kong SCC-U50F-A TRINITRON COLOR TV ®...
  • Page 4 THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE CARBON PAINTED ON THE CRT, AFTER REMOVING THE THESE COMPONENTS WITH SONY PARTS WHOSE PART ANODE. NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 5: Table Of Contents

    KV-AR29M90 RM-993 TABLE OF CONTENTS Section Title Page Section Title Page SELF DIAGNOSTIC FUNCTION ........4 5. DIAGRAMS 1. DISASSEMBLY 5-1. Block Diagram ............27 1-1. Rear Cover Removal ........... 7 5-2. Circuit Boards Location ........... 29 1-2. Speaker Removal ............7 5-3.

  • Page 6: Self Diagnostic Function

    KV-AR29M90 RM-993 SELF DIAGNOSTIC FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will automatically begin to flash. The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER lamp flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 7 KV-AR29M90 RM-993 2. DISPLAY OF STANDBY/TIMER LIGHT FLASH COUNT Diagnostic Item Flash Count* 2 times +B overcurrent/overvoltage 2 times Vertical deflection stopped 3 times White balance failure 5 times * One flash count is not used for self-diagnostic. Lamp ON 0.3 sec. Lamp OFF 3 sec.
  • Page 8 KV-AR29M90 RM-993 5. HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAY Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs.

  • Page 9: Disassembly

    KV-AR29M90 RM-993 SECTION 1 DISASSEMBLY 1-1. REAR COVER REMOVAL 1-2. SPEAKER REMOVAL 2 Rear cover 1 Two screws 1 Night screws (+BVTP 4 × 16) (+BVTP 4 × 16) 2 Two screws (Washer Head) (+P4x16) 3 Two screws (+BVTP 4 × 16) 1-3.

  • Page 10: D3 Board Removal

    KV-AR29M90 RM-993 1-7. D3 BOARD REMOVAL 1-8. B1 BOARD REMOVAL 1 One Hooks 2 D3 Board 2 B1 Board 1-9. H1 AND H2 BOARDS REMOVAL 1-10. A AND B10 BOARDS REMOVAL 2 H1 Board 2 Two screws (3 × 12)(+) BVTP 1 Four hooks 3 Three hooks 5 One screw...

  • Page 11: Picture Tube Removal

    KV-AR29M90 RM-993 1-11. PICTURE TUBE REMOVAL Note: • Please make sure the TV set is not in standing posotion before removing necessary CRT support located on bottom right and left. 1) Place the TV set with the CRT face down on a cushion jig. 2) Removal the rear cover.

  • Page 12: Advance Operation

    KV-AR29M90 RM-993 SECTION 2 ADVANCE OPERATION 2-1. "RESET" FUNCTION 1. Purpose If a customer faces some setting problem that cannot be solved, using the "RESET" function some items will be reset to its original setting (shipment condition) 2. How to Operate The way to access to the "RESET"...

  • Page 13: Set-Up Adjustments

    KV-AR29M90 RM-993 SECTION 3 SET-UP ADJUSTMENTS • The following adjustments should be made when a complete Perform the adjustments in the following order : realignment is required or a new picture tube is installed. 1. Beam Landing • These adjustments should be performed with rated power 2.

  • Page 14: Convergence

    KV-AR29M90 RM-993 3-2. CONVERGENCE Preparation : • Before starting this adjustment, adjust the focus, horizontal size and vertical size. • Receive dot/hatch signal. Purity • Pic mode: Personal (Pic 90%, Brightness 50%, Colour 50 %, Hue 50%, Sharpness 50%). BMC (Hexapole) Purity (1) Horizontal and Vertical Static Convergence Center dot...
  • Page 15 KV-AR29M90 RM-993 BMC (Hexapole) Magnet. If the red, green and blue dots are not balanced or aligned, then Blue use the BMC magnet to adjust in the manner described below. Neck assy Neck assy Blue VM1 board VM1 board Note 1.

  • Page 16: Focus Adjustment

    KV-AR29M90 RM-993 Rotate TLV-2 VOL (29”, 34”) on DY 3-3. FOCUS ADJUSTMENT XCV Rotate XCV Adj core on DY FOCUS adjustment should be completed before W/B adjustment. YCH Rotate YCH VOL on DY Insert Correction Plate to DY Pocket (Left or Right) ON DY: TLV1 Focus...

  • Page 17: G2 (Screen) And White Balance Adjustment

    KV-AR29M90 RM-993 2. WHITE BALANCE ADJUSTMENT 3-4. G2 (SCREEN) AND WHITE BALANCE 1) Set to Service Mode (Refer Section 4-1: ADJUSTMENTS ADJUSTMENTS WITH COMMANDER). 1. G2 (SCREEN) ADJUSTMENT 2) Input white raster signal. 1) Set the PICTURE to normal. 3) Set the PICTURE to minimum. 2) Put to VIDEO input mode without signals.

  • Page 18: Circuit Adjustments

    KV-AR29M90 RM-993 SECTION 4 CIRCUIT ADJUSTMENTS 4-1. ADJUSTMENTS WITH COMMANDER 4-2. ADJUSTMENT METHOD Service adjustments to this model can be performed using the Item Number 00 of device GEO supplied Remote Commander RM-993. This explanation uses H-Position as an example. 1.
  • Page 25 KV-AR29M90 RM-993 ITEM INFORMATION No. OPB0 OP1 Item XTAL 4.43 XTAL 3.58 SECAM 2nd. Lang KV-AR29M90 (APPLICABLE FOR XF-L(21" & 14") MODELS ONLY. No. OPB1 OP2 AV Input Item NICAM HDEV Thai Bil PIP 4 DVD Input KV-AR29M90 AV Input 00 = no AV Input 01 = 1 AV Input 10 = 2 AV Input...

  • Page 26: Adjustment For Non Digital Texture Enchancer (Dte) Model

    KV-AR29M90 RM-993 4-4. ADJUSTMENT FOR DIGITAL TEXTURE 4-3. ADJUSTMENT FOR NON DIGITAL TEXTURE ENHANCER (DTE) MODEL ENHANCER (DTE) MODEL Y LEVEL ADJUSTMENT (not used for this model) SUB COLOR ADJUSTMENT 1. Select Video. 2. Input PAL Color Bar to TV set (white reference 100%). 1.

  • Page 27: Display Position Adjustment

    KV-AR29M90 RM-993 SUB COLOR (YCJ) ADJUSTMENT PMX ADJUSTMENT 1. Select Video. 1. Select Video (Wide mode: OFF). 2. Input PAL Color Bar to TV set. 2. Input PAL Color Bar to TV set. 3. Set the following condition: 3. Set the following condition: Pic: 100%, Col: 50%, Brightness: 50%, DTE: OFF Pic: 100%, Col: 50%, Brightness: 50%, DTE: OFF 4.

  • Page 28: Picture Distortion Adjustment

    KV-AR29M90 RM-993 4-7. PICTURE DISTORTION ADJUSTMENT (1) PICTURE DISTORTION ADJUSTMENT (2) Item Number 00 – 0B GEO 0 HPS (H POSITION) H-TRAPEZOID (DAC 4 HTR) GEO 1 HSZ ( H SIZE) GEO 2 PAP (PIN AMP) GEO 3 TLT (TRAPEZIUM) GEO 4 VPS (V POSITION) GEO 5...

  • Page 29: Diagrams

    KV-AR29M90 KV-AR29M90 RM-993 RM-993 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM AUDIO OUT (30) DBFB 3D BOX ASSY IC6201 Q6202/ Front AV IN, Q6206/Q6207 TDA7481 Sensor) MAIN.TUVF with AV SW TV.V In L1 out IC3302 AUDIO OUT SP ASSY STEREO TV.L In IC3202 R1 out NJW1139...

  • Page 30: Circuit Boards Location

    KV-AR29M90 RM-993 5-2. CIRCUIT BOARDS LOCATION C6 Board H2 Board VM1 Board D3 Board H1 Board A Board F Board B1 Board V1 Board (Not used for B10 Board this model) J Board – 29 –...

  • Page 31: Schematic Diagram

    KV-AR29M90 RM-993 5-3. SCHEMATIC DIAGRAM Note: • All capacitors are in µF unless otherwise noted. • All electrolytic capacitors are rated at 50V unless otherwise noted. • All resistors are in ohms. kΩ = 1000Ω, MΩ = 1000kΩ • Indication of resistance which does not have rating electrical power is as follows.

  • Page 32: C6 Board Schematic Diagram

    KV-AR29M90 KV-AR29M90 RM-993 RM-993 (1) C6 Board Schematic Diagram CN702 1P :TAB R701 FOCUS 100k1/2W L701 C701 TO G2 FBT SG701 200V 0.0047 :EL0607 200V D1808 RV1801 C719 C717 GP08DPKG23 H.STAT 250V G1-1 C1809 J701 CN1801 1000 D718 SOCKET RV702 R705 CN712 110M...

  • Page 33: A Board Schematic Diagram

    KV-AR29M90 KV-AR29M90 RM-993 RM-993 (2) A Board Schematic Diagrams CN101 CN102 CN106 :BTOB :BTOB TO B10 BOARD CN204 CN203 TO B10 BOARD :S-MICRO CN1405 CN1407 CN303 TU101 CN104 CN302 BTF-WG441 :BTOB :TAB :BTOB CN205 CN105 TO B10 BOARD TO F BOARD CN1406 CN4603 R336...
  • Page 34 KV-AR29M90 KV-AR29M90 RM-993 RM-993 CN507 R501 1k :CHIP :S-MICRO NS ROT TO C6 BOARD NS MUTE R500 CN1801 C512 0.0033P 25V B:CHIP L516 R502 C500 L515 L517 R596 C514 COIL 135V 680 3W :RS 0.047 :DCC NS ROT 200V SYSTEM CONTROLLER, Y/C JUNGLE, R527 NS MUTE DEFLECTION, TUVIF, FRONT AMP,...

  • Page 35: B10 Board Schematic Diagram

    KV-AR29M90 KV-AR29M90 RM-993 RM-993 (3) B10 Board Schematic Diagram CN1400 TU1401 C1461 :S-MICRO R1411 F:CHIP :CHIP R IN C1460 D1415 R1409 470p C1462 220k CH:CHIP R1412 UDZSTE-179.1B R1420 :CHIP C1450 C1453 L IN F:CHIP R1474 :CHIP R6220 JR1409 C1459 C1437 C1463 R1410 D1416...

  • Page 36: B1 And D3 Boards Schematic Diagrams

    KV-AR29M90 KV-AR29M90 RM-993 RM-993 (4) B1 and D3 Boards Schematic Diagrams C1522 C1523 C1524 R1547 R1528 R1538 R1517 0.47 150p L1507 L1508 DVD Y CH:CHIP CH:CHIP :CHIP Q1503 :CHIP :CHIP :CHIP F:CHIP MSD601-RTI L1506 Q1505 IC2801 DVD BY C2801 C2806 MSD601-RTI LM358D Q1507...
  • Page 37 KV-AR29M90 KV-AR29M90 RM-993 RM-993 (5) VM1 and F Boards Schematic Diagrams CN5901 :S-MICRO TO A BOARD CN306 C5919 D5905 C5902 1SS133T-77 :MPS C5904 Q5905 L5902 R5930 R5913 R5917 2SC2458-YGR R5927 R5934 BUFFER C5906 0.047 C5921 R5924 R5916 R5918 C5900 D5906 R5901 JW(5MM) 1.5k...

  • Page 38: H1 Board Schematic Diagram

    KV-AR29M90 KV-AR29M90 RM-993 RM-993 (6) H1 Board Schematic Diagram TO B BOARD TO J BOARD TO B10 BOARD TO B10 BOARD TO A BOARD CN6202 CN3451 CN1400 CN6204 CN904 CN3903 CN3906 CN3904 CN3905 CN3902 9P RED :S-MICRO 9P WHT :S-MICRO 6P WHT :S-MICRO TO SP CN3901...

  • Page 39: J Board Schematic Diagram

    KV-AR29M90 RM-993 (7) J Board Schematic Diagram CN2410 :S-MICRO TO B1 BOARD J2410 CN1501 R2421 C2410 DVD Y D2410 R2410 NNCD9.1A-T1 DVD BY C2411 R2411 R2419 D2411 DVD RY NNCD9.1A-T1 D2412 DVD L NNCD9.1A-T1 DVD R R2412 R2420 C2412 C2413 R2414 C2418 R2415...

  • Page 41: Voltage List And Waveforms

    KV-AR29M90 RM-993 5-4. VOLTAGE LIST AND WAVEFORM A BOARD Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC001 (1.6)[2.2] (4.7)[0] IC002 4.080Vp-p IC003 5.120Vp-p 0.2Vp-p IC100 4.880Vp-p IC301 (0)[4.9] (0)[1.2] (0)[2.1] 1.1Vp-p 3.760Vp-p NTSC 880.0mVp-p (4.6)[4.4] 3.520Vp-p 1.3Vp-p (1.9)[2.5] 920.0mVp-p 1.160Vp-p 4.000Vp-p...
  • Page 42 KV-AR29M90 RM-993 A BOARD Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] Q301 12.0 Q511 11.8 Q302 Q600 12.2 Q303 Q601 (0)[2.7] Q304 Q602 (3.1)[0] 16.8 IC302 (0.3)[0.6] Q305 Q603 16.8 16.9 Q306 Q604 133.8 134.0 Q308 Q605 (0)[2.2] (266.3)[257] Q309 Q606...
  • Page 43 KV-AR29M90 RM-993 B10 BOARD Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC1401 IC3204 IC6200 IC3205 12.3 25.8 12.0 Q1316 Q1317 Q1318 Q1323 IC3301 Q1324 Q1365 Q1372 Q1401 IC3302 Q1402 Q1403 Q1404 IC1402 Q1408 Q1409 Q3201 IC1404 12.1 Q3202 IC3200 Q3203 Q3204...
  • Page 44 KV-AR29M90 RM-993 C6 BOARD Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC1800 Q705 (136)[*] Q706 Q707 170.0Vp-p (*)[0.2] 12.7 Q708 J701 (135)[132] (5.7)[6.1] Q709 (5.1)[5.6] 24.80Vp-p (*)[132] Q710 (1.9)[2.0 (266)[263] 164.0Vp-p Q701 (135)[*] Q711 Q702 Q712 Q703 (*)[131] 160.0Vp-p Q714 Q704...
  • Page 45 KV-AR29M90 RM-993 D3 BOARD Pin No. Voltage[v] Pin No. Voltage[v] IC2800 13.2 Q2801 (*)[0.3 (3.1)[*] IC2801 Q2802 12.7 Q2803 12.1 (1.2)[1.4] 12.7 Q2804 12.1 Q2800 (0.41)[*] H1 AND H2 BOARD Pin No. Voltage[v] IC3901 (4.9)[4.8] (0)[4.9] (4.8)[0] Q3901 Q3902 (4.7)[0] (2.4)[4.9] (2.0)[0.1] B1 BOARD...

  • Page 46: Printed Wiring Boards And Parts Location

    KV-AR29M90 RM-993 5-5. PRINTED WIRING BOARDS AND PARTS LOCATION PRINTED WIRING BOARDS [CISPR] [VIDEO AMP, ROTATION CIRCUIT] – C6 Board – JW1801 EY705 Q1803 R1807 R732 R731 D715 D712 D714 D713 R751 JW704 D717 EY711 EY709 EY704 EY703 EY702 EY701 Q1802 EY708 D709...
  • Page 47 KV-AR29M90 KV-AR29M90 RM-993 RM-993 NOTE: The circuit indicated at left contains high voltage of over PRINTED WIRING BOARDS 1220 Vp-p. Please pay attention when inspecting or re- pairing it to prevent an electric shock. [SYSTEM CONTROLLER, Y/C JUNGLE, DEFLECTION, TUVIF, FRONT AMP, POWER SUPPLY] –...
  • Page 48 KV-AR29M90 KV-AR29M90 RM-993 RM-993 PRINTED WIRING BOARDS [AUDIO PROCESSOR, AUDIO AMP, SUB TUNER, AV IN/OUT, VM DRIVER] – B Board – R1427 R1412 C1462 JW6223 R1411 C1461 L6202 JW1471 FB6203 JW1474 IC1402 R6220 JW6226 EY1201 R1420 EY6202 EY6200 R6241 Q1409 FB6202 C1450 R1434...
  • Page 49 KV-AR29M90 KV-AR29M90 RM-993 RM-993 PRINTED WIRING BOARDS [DYNAMIC FOCUS, DQP] [RECEIVER, POWER SW, LED] – H Board – [VELOCITY MODULATIONM] [FRONT AV IN, KEY SW] – D Board – JW2803 CN2803 IC2800 C2802 R2803 R2800 R2802 R2805 R2804 T2800 JW2805 C2811 R2816 Q2800...
  • Page 50 KV-AR29M90 RM-993 PRINTED WIRING BOARDS [DVD TERMINAL] [DVD, SWITCH] – J Board – – B1 Board – Q1501 R1545 C1525 JW 1502 R1552 Q1502 Q1514 Q1510 C1528 L1506 R1559 R1560 Q1505 Q1503 R1554 C1527 Q1522 Q1516 Q1515 R1528 R1567 Q1509 Q1507 Q1520 JW 1505...

  • Page 51: Semiconductors

    KV-AR29M90 RM-993 5-7. SEMICONDUCTORS TRANSISTOR LETTER SIDE LETTER SIDE 2SK2845-LB102 DTC144EKA 2SK246-GR 2SC2458-YGR 2SC2611 DTC144ESA MSD601-RT1 2SC3576 2SC2688-LK 2SA1175-HFE UN2111 2SC2785-HFE UN2213 2SA1162-G 2SC2712-YG 2SD2114K DIODE CATHODE ANODE IRF614 2SD2578-CA D1N20R 2SC2958 2SA1606-E 2SA1091-0 D1NS4 2SC4793 2SC2551-0 2SC4159-E RD39ES-B RD6.8ES-B1 RD20ES-B2 RD30ES-B2 1SS119-25...
  • Page 52 KV-AR29M90 RM-993 DIODE TOP VIEW Single In -line Package Pin 8~98 MMDL914T1 S-80743-AL-A7-S NJM78M09FA CXA1315M 30DF2N-FCS MM1319AFBE NJM2903M NJU4066BM LM358D UPC4558G2 TOP VIEW Dual In-line Package Pin 6~98 CXA1855S SE-135N TDA8172 SBX3081-21 TA8200AH CXA2159S CXP750097-602S M24C08-BN6 MARKING SIDE VIEW Zig-zag In -line Package Pin 6~99 STR-F6456S –...

  • Page 53: Exploded Views

    KV-AR29M90 RM-993 SECTION 6 EXPLODED VIEWS NOTE: • • Items marked " ∗ " are not stocked since Items with no part number and no The components identified by description are not stocked because they are seldom required for routine shading and mark ! are critical they are seldom required for routine service.

  • Page 54: Chassis

    KV-AR29M90 RM-993 6-2. CHASSIS r : 7-685-648-79 SCREW +BVTP 3 × 12 p : 7-685-663-79 SCREW +BVTP 4 × 16 REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK * A-1400-888-A H1 BOARD MOUNTED * A-1241-445-A F BOARD MOUNTED * A-1300-556-A B10 BOARD COMPLETE * 4-067-074-01 BRACKET F PWB...

  • Page 55: Picture Tube

    KV-AR29M90 RM-993 6-3. PICTURE TUBE r : 7-685-648-79 SCREW +BVTP 3 × 12 p : 7-685-663-79 SCREW +BVTP 4 × 16 REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK X-4040-413-1 BEZNET ASSY 152-154, 172,173 4-369-318-61 SPRING, TENSION 4-036-405-11 SPRING, COMPRESSION 1-452-032-00...

  • Page 56: Electrical Parts List

    KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. SECTION 7 Replace only with part number specified. ELECTRICAL PARTS LIST REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK • Items marked " ∗ " are not stocked since •...
  • Page 57 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C519 1-102-212-00 CERAMIC 820PF 10.00% 500V C616 1-130-202-00 FILM 0.022UF 5.00% 400V...
  • Page 58 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK CN608 1-564-507-41 PLUG, CONNECTOR 4P D613 8-719-046-74 AU-01Z-V1 CN904 * 1-564-512-11 PLUG, CONNECTOR 9P D614...
  • Page 59 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK JR007 1-216-295-91 SHORT CHIP <IC LINK> JR008 1-216-295-91 SHORT CHIP JR010 1-216-295-91...
  • Page 60 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R024 1-216-063-91 RES-CHIP 3.9K 1/10W R320 1-216-065-91 RES-CHIP 4.7K 1/10W R025...
  • Page 61 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R522 1-208-806-11 METAL CHIP 0.5% 1/10W R597 1-247-750-11 CARBON 1/2W R523...
  • Page 62 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <SWITCH> C1543 1-126-933-11 ELECT 100UF 20.00% 16V C1544 1-165-319-11 CERAMIC CHIP 0.1UF...
  • Page 63 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R1516 1-216-025-11 RES-CHIP 1/10W C1416 1-164-346-11 CERAMIC CHIP R1517 1-216-075-00 RES-CHIP...
  • Page 64 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C3257 1-164-346-11 CERAMIC CHIP C6245 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V C3258 1-163-989-11...
  • Page 65 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <CHIP CONDUCTOR> R1362 1-216-055-00 RES-CHIP 1.8K 1/10W R1363 1-216-033-00 RES-CHIP 1/10W...
  • Page 66 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R1461 1-216-025-11 RES-CHIP 1/10W R3236 1-216-113-00 RES-CHIP 470K 1/10W R1463 1-249-429-11...
  • Page 67 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK * A-1401-078-A C6 BOARD MOUNTED <COIL> ******************** L701 1-410-667-31 INDUCTOR 22UH...
  • Page 68 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R757 1-249-427-11 CARBON 6.8K 1/4W <IC> R758 1-249-419-11 CARBON 1.5K 1/4W...
  • Page 69 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <CONNECTOR> <TRANSISTOR> CN4601 1-580-843-11 PIN, CONNECTOR (POWER) Q3901 8-729-030-02 DTC144ESA CN4602...
  • Page 70 KV-AR29M90 RM-993 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. J VM REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <IC> * A-1401-080-A VM1 BOARD MOUNTED ********************** IC3901 6-600-129-01...
  • Page 71 R5923 1-249-383-11 CARBON 1/4W REMOTE COMMANDER R5925 1-249-400-11 CARBON 1/4W ********************** R5927 1-249-416-11 CARBON 1/4W R5929 1-215-880-00 METAL OXIDE 1-477-407-11 REMOTE COMMANDER (RM-993) **************************************************************** Sony Corporation Sony Technology Malaysia Sdn. Bhd. English  2002.5 9-872-312-01 Visual Products – 80 –...
  • Page 72 4-088-211-11 (2) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. 使用說明書 • 使用本電視機之前請先詳細閱讀此手冊﹐並妥善保存以備日後用作參考。 使用说明书 • 使用本电视机之前请详细阅读此手册，并妥善保存以备日后用作参考。 KV-AR29 © 2002 Sony Corporation...
  • Page 73 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220-240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 74 Do not plug in too many appliances to the same Do not place any objects on the TV. power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source Install the TV on a stable TV stand and floor which (mains) as long as the power cord is plugged in.
  • Page 75 x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band (1) Screw the band and one clamp to the provided hole at the rear of your TV. (2) Screw the band to the TV stand.
  • Page 76 Table of Contents Installation Menu Adjustment Getting Started ........6 Introducing the menu system ..15 Setting up your TV Changing the “PICTURE” setting ... 18 (“INITIAL SETUP”) ......7 Changing the “SOUND” setting ..20 Changing the “SETUP” setting ..22 Changing the Channel Preset Overview of Controls (“CH PRESET”) setting .....

  • Page 77: Installation

    Installation x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...

  • Page 78: Setting Up Your Tv ("Initial Setup")

    x Setting up your TV (“INITIAL SETUP”) MENU SOUND When you turn on your TV for the first time, MENU PIP PROGR the “INITIAL SETUP” menu will appear. This menu allows you to change the menu V/v/ENTER ENTER language, adjust the picture position and preset the TV channels automatically.

  • Page 79: Overview Of Controls

    Overview of Controls TV front and rear panels TV rear panel ENTER SELECT PROGR AUTO L(MONO) MENU PROGR TV front panel ENTER SELECT L(MONO) AUTO MENU PROGR PROGR Button/Terminal Function Page Turn off or turn on the TV. Standby indicator. –...

  • Page 80: Remote Control

    Remote control Button Function Page 1 ?/1 Turn off temporarily or – turn on the TV. Display the TV input. – 4 0 – 9, - Input numbers. – 5 JUMP Jump to previous program – number. 9 SURROUND Select surround mode. 0 WIDE MODE Select wide-mode (16:9).
  • Page 81 continued Button Function Page Menu operations MENU Display or cancel the menu. ENTER Confirm selected items. V, v, B, b Select and adjust items. Teletext operations (green label) 0 – 9 JUMP PROGR +/– SOUND MENU PIP PROGR Not function for your TV. –...

  • Page 82: Advanced Operations

    Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “PERSONAL” option. Selecting the picture mode Press PIC MODE to select the desired picture mode. Select “DYNAMIC”...

  • Page 83: Viewing The Picture In Wide Mode

    Viewing the picture in wide mode When receiving a wide-mode (16:9) signal, the picture will appear “squeezed” (compressed) on your screen. Use the WIDE MODE button to view the picture with the optimal effect. ENTER Select DRC-MF PIP PROGR SOUND WIDE SURROUND WIDE...

  • Page 84: Enjoying Stereo Or Bilingual Programs

    x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. When receiving a NICAM program Broadcasting On-screen display (Selected sound) NICAM MONO NICAM stereo (Regular sound) (Stereo sound) JUMP NICAM...

  • Page 85: Setting The Timers

    x Setting the timers You can set your TV to turn on and off automatically by using the WAKE UP and SLEEP timers respectively. Setting the Wake Up timer Press until the desired period of time appears on the screen. WAKE UP TIMER:10M (After 10 minutes) JUMP...

  • Page 86: Menu Adjustment

    Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon PICTURE icon Name of the current menu S E T UP SOUND icon L ANGUAGE :...
  • Page 87 “TV SYS” “B/G” t “I” t “D/K” t “M” * The BBE is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and the BBE symbol are the trademarks of BBE Sound, Inc.
  • Page 88 How to use the menu Press MENU to display MENU PIP PROGR MENU P I C T URE the menu. P I C T URE MO DE : DYNAM I WI DE MODE : OF F ENTER I N T E L I GE N T P I C : OF F I C : OF F...

  • Page 89: Changing The "Picture" Setting

    x Changing the “PICTURE” setting The “PICTURE” menu allows you to adjust the picture settings. Press MENU. Make sure the “PICTURE” icon ( ) is P I C T URE P I C T URE MODE : DYNAM I selected, then press ENTER. WI DE MODE : OF F I N T E L L P I C : OF F...
  • Page 90 Adjusting the “ADJUST” items under “PICTURE MODE” Press V or v to select the desired item (e.g.,“COLOR”), then press ENTER. COLOR Adjust the value according to the following table, then press ENTER. Press v or B to Press V or b to “PICTURE”...

  • Page 91: Changing The "Sound" Setting

    x Changing the “SOUND” setting The “SOUND” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “SOUND” SOUND icon ( ), then press ENTER. SOUND MODE DYNAM I C SURROUND : OF F I N T E L L I GEN T VO L : OF F Press V or v to select the desired item SOUND...
  • Page 92 Adjusting the “ADJUST” items under “SOUND MODE” Press V or v to select the desired item (e.g., “BALANCE”), then press ENTER. BALANCE Adjust the value according to the following table, then press ENTER . Press v or B to Press V or b to “BASS”...

  • Page 93: Changing The "Setup" Setting

    Changing the “SETUP” setting The “SETUP” menu allows you to change the menu language, adjust the picture position, set up your program numbers and select the color system. Press MENU. Press V or v to select the “SETUP” S E T UP icon ( ), then press ENTER.
  • Page 94 Adjusting each program number settings (“PROGRAM SETUP”) Select “PROGRAM SETUP” from the “SETUP” menu. Select “PR” and press ENTER. Press V or v PROGRAM S E T to select the desired program number you PR : S K I P : OF F want to adjust, then press ENTER.

  • Page 95: Changing The Channel Preset ("Ch Preset") Setting

    x Changing the Channel Preset (“CH PRESET”) setting The “CH PRESET” menu allows you to preset channels automatically, manually preset channels and select the TV system. Press MENU. Press V or v to select the “CH PRESET” icon CH PRE S E T ), then press ENTER.
  • Page 96 Presetting channels manually After selecting “MANUAL PROGRAM”, MANUA L PROGRAM select the program number to which you PR : want to preset a channel. T V S Y S : B / G VH F L OW (1) Make sure “PR” is selected, then press F I NE : AU TO ENTER.
  • Page 97 continued If you are not satisfied with the picture and sound quality, you may be able to MANUA L PROGRAM improve them by using the “FINE” tuning PR : 1 0 AU TO T V S Y S : I MANUA L feature.

  • Page 98: Additional Information

    Additional Information x Connecting optional components Connecting to the video input terminal ( t ) S Video cable TV front panel (not supplied) Audio/Video cable Camcorder (not supplied) L(MONO) TV rear panel Video game equipment Antenna cable (not supplied) Audio/Video cable (not supplied) S Video cable (not supplied)
  • Page 99 continued Connecting a DVD player to the component video input terminal ( 1 Using an audio cable, connect R and L under (component video input) on your TV to the LINE OUT, AUDIO R and L output connectors on your DVD player. 2 Using a component video cable, connect Y, C , and C under...

  • Page 100: Troubleshooting

    TV, VCR and at the wall. damaged. • The antenna setup is • Check the antenna setup. – inappropriate. Contact a Sony dealer for advice. • Channel presetting is • Display the “CH PRESET” menu and Noisy sound inappropriate or select “MANUAL PROGRAM” to preset incomplete.
  • Page 101 Dotted lines or interference from cars, equipment near the TV. stripes neon signs, hair dryers, – • Check the antenna setup. Contact a Sony power generators, etc. dealer for advice. • Broadcast signals are – • Use a highly directional antenna.
  • Page 102 • Check the antenna cable and connection or the cable is damaged. on the TV, VCR and on the wall. • The antenna setup is • Check the antenna setup. Contact a Sony Stereo broadcast inappropriate. dealer for advice. sound switches –...

  • Page 103: Specifications

    Output: 1 Stereo minijack Picture tube 29 in. Tube size (cm) Measured diagonally Screen size (cm) Measured diagonally 765 × 578 × 502 Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Sony Corporation Additional Information...

Table of Contents