Removing The Dvd Mechanism Assembly; No.mb385)1 - JVC MX-JE3 Service Manual

3.1.6 Removing the DVD mechanism assembly

(See Figs.12 and 13)
• Remove the metal cover, tuner and video board.
(1) From the top side of the main body, remove the three
screws M attaching the DVD mechanism assembly on the
center chassis. (See Fig.12.)
(2) From the forward side of the main board, disconnect the
card wires from the connectors (CN11, CN511, CN513).
(See Fig.12.)
Reference:
When reassembly, pass the card wire through the sec-
tion f of the main board before connecting the card wire
to the connector CN11. (See Fig.12.)
(3) Remove the spacers fixing the card wires. (See Fig.12.)
Reference:
After connecting the card wires, fix them with the spacers
as before. (See Fig.12.)
(4) From the inside of the main body, take out the DVD mech-
anism assembly.
(5) Remove the tray fitting from the DVD mechanism assembly
in the direction of the arrow. (See Fig.13.)
1-12 (No.MB385)
DVD mechanism assembly
M
Main board
Card wire
f
Card wire
Fig.12
DVD mechanism assembly
Tray fitting
Fig.13
M
Center chassis
Spacer
Card
wires
Spacer
CN11 CN513
CN511