Lexus 2008 IS250 Owner's Manual page 38

Setting and canceling the functions
n
To switch between setting and canceling, follow the procedure below:
Close all the doors and switch the "ENGINE START STOP"
STEP 1
switch to IGNITION ON mode. (Perform the step 2 within 10
seconds.)
Shift the shift lever to P or N, and press and hold the driver's door
STEP 2
lock switch (
release.
The shift lever and switch positions corresponding to the desired func-
tion to be set or canceled are shown as follows.
Function
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking function
Driver's door linked door unlocking
function
When the setting or canceling operation is complete, all doors are locked
and then unlocked.
1-2. Opening, closing and locking the doors and trunk
) for approximately 5 seconds and then
or
Shift lever position Switch position
P
N
1
39