Table of Contents
Advertisement
2-2. Instrument cluster
Gear position display
n
(vehicles with an automatic transmission only)
System check display
n
After switching the "ENGINE START STOP" switch to IGNITION ON mode,
"CHECK" is displayed while system operation is checked. When the system check
is complete, "COMPLETED" is displayed before returning to the normal screen.
CAUTION
The information display at low temperatures
n
Allow the interior of the vehicle to warm up before using the liquid crystal informa-
tion display. At extremely low temperatures, the information display monitor may
respond slowly, and display changes may be delayed.
For example, there is a lag between the driver's shifting and the new gear number
appearing on the display. This lag could cause the driver to downshift again, causing
rapid and excessive engine braking and possibly an accident resulting in personal
death or injury.
142
Indicates the current gear, and the range of gears
that is available when the shift lever is in the S or D
position. the gear range is shown by the number of
dots ( ) and the current gear is shown as a number.
The transmission automatically selects the gears
within the driver selected gear range.
In the illustration to the left, a range of 6 available gears
(1 through 6) has been selected by the driver. (The shift
lever is in the D or S position with 6 ranges enabled) It is
possible for the transmission to automatically select
between all 6 of the gears. In this case, the transmission
has selected third gear.
Advertisement
Table of Contents
