Lexus 2008 IS250 Owner's Manual page 266

Test the operation of the HomeLink by pressing the newly pro-
STEP 5
grammed button. Check to see if the gate/device operates cor-
rectly.
Repeat the steps above to program another device for each of
STEP 6
the remaining HomeLink buttons.
Programming other devices
n
To program other devices such as home security systems, home door
locks or lighting, contact your authorized Lexus dealer for assistance.
Reprogramming a button
n
The individual HomeLink
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink
Press the appropriate HomeLink button. The HomeLink indicator
light on the HomeLink transceiver should turn on.
The HomeLink continues to send a signal for up to 20 seconds as long as
the button is pressed.
Erasing the entire HomeLink memory (all three programs)
buttons cannot be erased but can be
Press and hold down the 2 outside
buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink memory.
3-5. Other interior features
3
267