Table of Contents
Advertisement
4-3. Do-it-yourself maintenance
Registering and selecting ID codes
To select tire pressure warning valve and transmitter ID codes, use the
satellite switch. ( P. 245)
Registering ID codes
n
2 sets of tire pressure warning valve and transmitter ID codes can be
registered. Once a second set of tires is registered at "2ND", you can
switch between tire set settings simply by pressing the tire pressure
warning select switch.
There are 2 settings:
"MAIN" position: The ID code of the tire pressure warning valve and
transmitter on the tires originally installed on the vehicle is registered.
"2ND" position:The ID code is not registered. When you replace a
new set of tires, purchase tire pressure warning valves and transmitters
from your Lexus dealer and have the new ID code registered by your
Lexus dealer.
Selecting ID codes
n
When replacing tires, make sure to select the ID code set that matches
the new tire set. If the tire pressure select switch is set to the wrong tire
setting, the tire pressure warning system will not operate properly.
After driving for about 20 minutes, the tire pressure warning light
comes on after blinking for 1 minute to indicate a system malfunction.
310
Tire pressure warning valve and
transmitter ID code settings dis-
play
Press
or
repeatedly until the
setting display appears.
Switching ID codes
Press the "ON/OFF" button to
switch between "MAIN" and
"2ND" ID codes.
Advertisement
Table of Contents
