Polaris BRUTUS Owner's Manual page 87

MAINTENANCE
Horse Power Management
Description
Horsepower management automatically increases or decreases
pressure to the hydrostatic transmission to sustain engine rpm
and maintain optimum drive performance.
WARNING
Avoid Serious Injury Or Death.
• Always keep bystanders away from the work area and travel path.
• The operator must always look in the direction of travel.
86
Inspection and Maintenance
Test conditions: Air Con-
ditioning off, no weight in
cargo box, operator only.
no attachment, no signifi-
cant electrical loads:
In a controlled area, free
of bystanders and on a
flat level hard surface.
Start the engine. See page
41. Operate the machine
until engine and hydrau-
lics are at operating tem-
perature. Move the gear
selector lever to high. Traveling in a straight path, accelerate at
a high rate and monitor engine RPM. The engine RPM will
increase moderately and then increase quickly to approxi-
mately 3200 - 3700 RPM and maintain this RPM. If engine
speed does not meet this RPM range after 5 seconds of opera-
tion, contact your dealer for service.
If less responsive horsepower management is desired (i.e.:
increased engine lugging during operation), see your dealer for
adjustment.
Tip: Adjustments to the horsepower management systems are not
considered a defect and therefore are not a warrantable item.