Removal Of Deck Parts - Toshiba MV19L3C Service Manual

2. REMOVAL OF DECK PARTS

2-1: TOP BRACKET (Refer to Fig. 2-1)
Remove the 2 screws 1.
1.
Slide the 2 supports 2 and remove the Top Bracket.
2.
NOTE
When you install the Top Bracket, install the screw (1)
first, then install the screw (2).
1
(2)
Top Bracket
2
Main Chassis
• Screw Torque: 5 ± 0.5kgf•cm
2-2: FLAP LEVER/TAPE GUIDE R (Refer to Fig. 2-2)
1. Move the Cassette Holder Ass'y to the back side.
Remove the Polyslider Washer 1.
2.
3. Remove the Flap Lever.
Unlock the 3 supports 2 and remove the Tape Guide R.
4.
Tape Guide R
2
2 2
2-3: TAPE GUIDE L (Refer to Fig. 2-3-A)
1. Move the Cassette Holder Ass'y to the back side.
Unlock the 2 supports 1 and remove the Tape Guide L.
2.
3. Remove the REC Lever. (Recorder only)
Tape Guide L
1
1
• The REC Lever is not installed on the Video Cassette Player.
DISASSEMBLY INSTRUCTIONS
(1)
Top Bracket
2
Main Chassis
Fig. 2-1
Flap Lever
1
Main Chassis
Fig. 2-2
REC Lever
Main Chassis
Fig. 2-3-A
NOTE
When you install the Tape Guide L, install as shown in the
circle of Fig. 2-3-B. (Refer to Fig. 2-3-B)
1
• The REC Lever is not installed on the Video Cassette Player.
2-4: CASSETTE HOLDER ASS'Y (Refer to Fig. 2-4)
1. Move the Cassette Holder Ass'y to the front side.
2. Push the Locker R to remove the Cassette Side R.
3. Remove the Cassette Side L.
Main Chassis
2-5: CASSETTE SIDE L/R (Refer to Fig. 2-5)
Unlock the 4 supports 1 and then remove the Cassette
1.
Side L/R.
NOTE
When you install the Cassette Side R, be sure to move the
Locker R after installing.
Cassette Side R
Tape Guide L
Cassette Side R
Cassette Side L
1
1
Locker R
1
REC Lever
Fig. 2-3-B
Locker R
Main Chassis
Fig. 2-4
1
Cassette Side L
Fig. 2-5