Toshiba MV13K1WR Service Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. TV
  5. MV13K1WR
  6. Service manual

Toshiba MV13K1WR Service Manual

Color television/ video cassette recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FILE NO. 140-200022
SERVICE MANUAL
COLOR TELEVISION/
VIDEO CASSETTE RECORDER
MV13K1WR

Advertisement

Table of Contents
loading

Related Manuals for Toshiba MV13K1WR

Summary of Contents for Toshiba MV13K1WR

  • Page 1 FILE NO. 140-200022 SERVICE MANUAL COLOR TELEVISION/ VIDEO CASSETTE RECORDER MV13K1WR...

  • Page 2: Servicing Notices On Checking

    SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, Safety is secured against an X-ray by consider- they are indicated with the labels or seals on the ing about the cathode-ray tube and the high cabinet, chassis and parts.

  • Page 3: General Specifications

    GENERAL SPECIFICATIONS G-1.Outline of the Product inch( 335.4 mmV):Measured diagonally Color CRT degree deflection -Speed 1/2" Video Cassette Recorder Recorder/Player VHS-C Player G-2.VCR Format VHS Standard NTSC SECAM PAL-M PAL-N VHS Hi-Fi Audio System G-3.Video Recording System :Rotary,slant azimuth two head helical scan system Luminance Component :FM recording Chrominance Component...
  • Page 4 GENERAL SPECIFICATIONS G-17.Tuner and Receiving channel 1Tuner System 2Tuner System BS Tuner Tuner : Contactless Electric tuner Oscar(W/O HYPER) Oscar(W/ HYPER) France CATV) Others channel coverage 2 ~ 69 , 4A , A-5 ~ A-1 , A ~ I , J ~ W , W+1 ~ W+84 Tuning System Frequency syn.
  • Page 5 GENERAL SPECIFICATIONS G-26.Power Consumption: 70 W at AC 60 Hz(Approx.) - W at DC (at TV and VCR ON) Stand by: 5 W at AC 60 Hz(Approx.) Per Year: --- kWh / Year G-27.Dimensions(Approx.) 362 mm(W) 369 mm(D) mm(H) G-28.Weight(Approx.) Net : 12.5 Kg ( 27.6 lbs)
  • Page 6 GENERAL SPECIFICATIONS G-38.Terminals VHF/UHF Antenna Input Din Type F-Type France Type Front Video Input<RCA ø8.3> Front Audio Input<RCA ø8.3> Rear Video Input<RCA ø8.3> Rear Audio Input<RCA ø8.3> Rear Video Output<RCA ø8.3> Rear Audio Output<RCA ø8.3> Ear Phone Jack(ø3.5) Head Phone Jack(Stereo & Mono, ø3.5) DC Jack 12V(Center +) AC Inlet Ext Speaker...
  • Page 7 GENERAL SPECIFICATIONS G-44.Carton Master Carton: Need No Need Content: ---- Material: ---- / ---- Corrugated Carton Dimensions: ---- mm(W) ---- mm(D) ---- mm(H) Description of Origin Gift Box Material Double/Brown Corrugated Carton ( with Photo Label) Double/White Corrugated Carton ( with Photo Label) Double Full Color Carton W/Photo Dimensions:...
  • Page 8 GENERAL SPECIFICATIONS G-47.Switch Front Power Channel Up Volume Up Play Channel Down Volume Down Pause/Still F.FWD/Cue Rew/Rev System Select Eject/Stop Rec/OTR One Touch Playback Main Power S W Input Select Rear Color On/Off (SECAM only) Degauss Main Power S W AC/DC G-48.Magnetic Field BV :...

  • Page 9: Removal Of Mechanical Parts And P.c. Boards

    DISASSEMBLY INSTRUCTIONS 1. REMOVAL OF MECHANICAL PARTS 1-3: TV/VCR BLOCK (Refer to Fig. 1-3) Remove the 2 screws 1. AND P.C. BOARDS Disconnect the following connectors: 1-1: BACK CABINET (Refer to Fig. 1-1) (CP352, CP353, CP354, CP401 and CP502). Remove the 4 screws 1. Unlock the support 2.

  • Page 10: Removal Of Deck Parts

    DISASSEMBLY INSTRUCTIONS 2. REMOVAL OF DECK PARTS NOTE When you install the Tape Guide L, install as shown in the 2-1: TOP BRACKET (Refer to Fig. 2-1) circle of Fig. 2-3-B. (Refer to Fig. 2-3-B) Remove the 2 screws 1. Slide the 2 supports 2 and remove the Top Bracket.
  • Page 11 DISASSEMBLY INSTRUCTIONS 2-6: LINK ASS'Y (Refer to Fig. 2-6) 2-9: TENSION ASS'Y (Refer to Fig. 2-9-A) Set the Link Ass'y to the Eject position. Move the Inclined S Ass'y to the back side. Remove the (A) side of the Link Ass'y first, then remove Remove the Tension Spring.
  • Page 12 DISASSEMBLY INSTRUCTIONS 2-11: S REEL/T REEL (Refer to Fig. 2-11) NOTE Remove the S Reel and T Reel. Do not touch the Pinch Roller. (Use gloves.) Remove the 2 Polyslider Washers 1. When you install the Pinch Roller Block, install as shown in the circle of Fig.
  • Page 13 DISASSEMBLY INSTRUCTIONS 2-15: AHC ASS'Y/CYLINDER UNIT ASS'Y (Refer to Fig. 2-15) Middle Gear Unlock the support 1 and remove the AHC Ass'y. E-Ring Remove the 3 screws 2. Remove the Cylinder Unit Ass'y. Main Cam NOTE Pinch Roller Cam When you install the Cylinder Unit Ass'y, tighten the screws from (1) to (3) in order while pulling the Ass'y Joint Gear toward the left front direction.
  • Page 14 DISASSEMBLY INSTRUCTIONS 2-19: LOADING GEAR S/T ASS'Y (Refer to Fig. 2-19-A) 2. When you install the Clutch Actuator, install as shown in the circle of Fig. 2-19-C. (Refer to Fig. 2-19-C) Remove the E-Ring 1 and remove the Main Loading Gear.

  • Page 15: Removal Of Anode Cap

    DISASSEMBLY INSTRUCTIONS 3. REMOVAL OF ANODE CAP 3. After one side is removed, pull in the opposite direction to remove the other. Read the following NOTED items before starting work. NOTE After turning the power off there might still be a potential Take care not to damage the Rubber Cap.

  • Page 16: Key To Abbreviations

    KEY TO ABBREVIATIONS Audio/Control H.SW Head Switch Automatic Color Control Hertz Audio Erase Integrated Circuit Automatic Frequency Control Intermediate Frequency Automatic Fine Tuning Indicator AFT DET Automatic Fine Tuning Detect Inverter Automatic Gain Control Killer Amplifier Left Antenna Light Emitting Diode A.PB Audio Playback LIMIT AMP...
  • Page 17 KEY TO ABBREVIATIONS SYNC Synchronization SYNC SEP Sync Separator, Separation Transistor TRAC Tracking TRICK PB Trick Playback Test Point UNREG Unregulated Volt Voltage Controlled Oscillator Video Intermediate Frequency Vertical Pulse, Voltage Display V.PB Video Playback Variable Resistor V.REC Video Recording Visual Search Fast Forward Visual Search Rewind Voltage Super Source...

  • Page 18: Service Mode List

    SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter SERVICE MODE, unplug AC cord till lost actual clock time. Then press and hold Vol (-) button of main unit and remocon key simultaneously.

  • Page 19: Preventive Checks And Service Intervals

    PREVENTIVE CHECKS AND SERVICE INTERVALS The following standard table depends on environmental conditions and usage. Unless maintenance is properly carried out, the following service intervals may be quite shortened as harmful effects may be had on other parts. Also, long term storage or misuse may cause transformation and aging of rubber parts. Time 1,000 1,500...

  • Page 20: Audio Control Head

    PREVENTIVE CHECKS AND SERVICE INTERVALS CLEANING NOTE 2. TAPE RUNNING SYSTEM After cleaning the heads with isopropyl alcohol, do not When cleaning the tape transport system, use the run a tape until the heads dry completely. If the heads gauze moistened with isopropyl alcohol. are not completely dry and alcohol gets on the tape, 3.

  • Page 21: Note For The Replacing Of Memory Ic

    NOTE FOR THE REPLACING OF MEMORY IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. NOTE: Initial Data setting will not be possible if clock has been set.

  • Page 22: Servicing Fixtures And Tools

    SERVICING FIXTURES AND TOOLS Alignment Tape Back tension cassette gauge Torque cassette gauge Taper nut driver (KT-300NR) ST-N5 ST-NF 70909103 70909199 70909228 VTR cleaning kit VTR lubrication kit Grease JG002B Adapter JG002E Dial Torque Gauge (10~90gf•cm) JG002F (60~600gf•cm) JG022 Master Plane JG024A Reel Disk Height JG153 X Value Adjustment JG154 Cable...

  • Page 23: Confirmation And Adjustment

    MECHANICAL ADJUSTMENTS 1. CONFIRMATION AND ADJUSTMENT 1-2: CONFIRMATION AND ADJUSTMENT OF TENSION POST POSITION Read the following NOTES before starting work. Set to the PLAY mode. • Place an object which weighs between 450g~500g on Adjust the Tension Adjust until the edge of the Tension the Cassette Tape to keep it steady when you want to Arm is positioning within 0.5mm range from the make the tape run without the Cassette Holder.

  • Page 24: Confirmation And Adjustment Of Tape Running Mechanism

    MECHANICAL ADJUSTMENTS 1-4: CONFIRMATION OF VSR TORQUE 2. CONFIRMATION AND ADJUSTMENT OF TAPE RUNNING MECHANISM Operate within 4~5 seconds after the reel disk begins to turn. Tape Running Mechanism is adjusted precisely at the Install the Torque Gauge (JG002F) and Adapter (JG002B) factory.
  • Page 25 MECHANICAL ADJUSTMENTS 2-2: CONFIRMATION AND ADJUSTMENT OF AUDIO/ 2-3: TAPE RUNNING ADJUSTMENT CONTROL HEAD (X VALUE ADJUSTMENT) When the Tape Running Mechanism does not work well, Confirm and adjust the height of the Reel Disk. adjust the following items. (Refer to item 1-1) Confirm and adjust the position of the Tension Post.

  • Page 26: Mechanism Adjustment Parts Location Guide

    MECHANICAL ADJUSTMENTS 3. MECHANISM ADJUSTMENT PARTS LOCATION GUIDE 1. Tension Adjust X value adjustment driver hole 2. Tension Arm P4 Post 3. Guide Roller T Brake Spring 4. P1 Post T Reel 5. Audio/Control Head S Reel...

  • Page 27: Before Making Electrical Adjustments

    ELECTRICAL ADJUSTMENTS BEFORE MAKING ELECTRICAL 2. BASIC ADJUSTMENTS ADJUSTMENTS (VCR SECTION) Read and perform these adjustments when repairing the 2-1: PG SHIFTER circuits or replacing electrical parts or PCB assemblies. Connect CH-1 on the oscilloscope to TP1002 and CH-2 CAUTION to pin 4 of CP1003.
  • Page 28 ELECTRICAL ADJUSTMENTS 2-3: RF DELAY 2-8: HORIZONTAL PHASE Receive a 70dB monoscope pattern. Receive the monoscope pattern. Connect the digital voltmeter between the pin 5 of Using the remote control, set the brightness and CP351 and the pin 1 (GND) of CP351. contrast to normal position.
  • Page 29 ELECTRICAL ADJUSTMENTS 2-13: SUB TINT 2-15: OSD HORIZONTAL Receive the color bar pattern. (RF Input) Activate the adjustment mode display of Fig. 1-1. Connect the synchro scope to TP803. Press the VOL. UP/DOWN button on the remote Using the remote control, set the brightness, contrast, control until the difference of A and B becomes color and tint to normal position.

  • Page 30: Electrical Adjustment Parts Location Guide

    ELECTRICAL ADJUSTMENTS 3. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE TP1001 CP1003 TP1002 TP4001 R520 VR502 TU601 FB401 CP351 FOCUS VOLUME SCREEN VOLUME SYSCON TP801 TP803 J801...

  • Page 31: Purity And Convergence Adjustments

    ELECTRICAL ADJUSTMENTS 4-3: STATIC CONVERGENCE 4. PURITY AND CONVERGENCE ADJUSTMENTS NOTE Adjust after performing adjustments in section 4-2. NOTE Receive the crosshatch pattern from the color bar Turn the unit on and let it warm up for at least 30 generator.

  • Page 32: Tv Block Diagram

    TV BLOCK DIAGRAM V. OUTPUT IC IC401 LA78040 MICON/ OPERATION/ THERMAL DECK PROTECTION Q602, Q603 Q606 AT+5V P.CON+8V AT+25V PUMP Q604, Q605 TU_AUDIO Y/C/AUDIO/ P.CON+5V HEAD AMP/ TU_VIDEO IN/OUT Y/C_AUDIO Q405 Q406 CHROMA IC IC601 M61203CFP H-DRIVE H. OUTPUT 33 39 46 63 48 DELAY ADJ 5.7Vreg...
  • Page 33 Y/C/AUDIO/HEAD AMP/IN/OUT BLOCK DIAGRAM X4001 3.579545MHz Q4009 Y/C/AUDIO/CCD/ BUFFER HEAD AMP IC IC4001 LA71067SM-MPB PULL SP/LP/EP-H VX01 MICON/ TIMMING CLAMP INPUT_SEL DRIVER OPERATION/ TRICK_PB-H/EE-H DECK H.SW DATAIL FM-EQ EMPHA DOC_XO_CTL CLAMP CP4001 CONV C-LPF EP/LP_CH2 (L) Y-LPF EP/LP_COM EP/LP_CH1 (R) H.AMP YNR/ B-UP...
  • Page 34 MICON/OPERATION/DECK BLOCK DIAGRAM SW1001 TIMER SYSCON MICON IC IC1001 OEC7043B TAB SW AT + 5V POWER_FAIL_L MSSEN-A P. CON + 5V POWER FAIL 2 MS_SEN A Q1009 X-OUT(12MHz) X1001 MSSEN-B 12MHz X-IN(12MHz) MS_SEN B Q1003 Q1023 XC-OUT(32KHz) X1002 Q1002 X_RAY_SW 32.768KHz XC-IN(32MHz) SENS LED...
  • Page 35 PRINTED CIRCUIT BOARDS OPERATION SOLDER SIDE J351 R761 R754 D793 D792 W001 R350 D791 W811 W002 R351 CD351_1 J701_1 C701 DECK SOLDER SIDE CP101 S101 S105 S106 S104 S103 Q101 S102...
  • Page 36 PRINTED CIRCUIT BOARDS SYSCON/CRT (INSERTED PARTS) SOLDER SIDE CP1006 L801 W291 W107 W813 S801 R450_2 R454 W811 D1005 C404 W091 W124 R820 C430_1 W088 Q806_1 TP801 TP802 TP803 W892 D614 W027 W154 W814 W249 W159 D618 W100 R678 W851 D612 D1004 W030 CP1005_1...
  • Page 37 PRINTED CIRCUIT BOARDS SYSCON/CRT (CHIP MOUNTED PARTS) SOLDER SIDE C1033 C1005 W918 W803 C4204 R352 R353 R357 C301 C4207 R4201 Q4201 C1024 R359 W913 Q1006 C353 W900 W801 Q4202 C617 R523 R4014 R4060 C4028 C4036 C4044 C4055 R1046 R4046 R4055 R1047 Q4009 R4057...

  • Page 38: Y/C/Audio/Head Amp Schematic Diagram

    Y/C/AUDIO/HEAD AMP SCHEMATIC DIAGRAM (SYSCON PCB) L4002 100uH 0305 W896 FROM POWER L4008 W922 S104Y S103X S103Y W836 100uH 0305 P.CON+5V W826 W923 R4070 R4041 6.8M TP4001 R4014 JWF-50K-1 1.8K FROM/TO CYL FROM/TO IN/OUT CP4001 TOC-C09X-A1 C4073 FRONT_AUDIO Y/C/AUDIO/CCD/HEAD AMP IC 2.4 2.4 2.4 0 2.4 5.0 2.3 2.3 2.8 2.3 1.5 2.0 0 1.4 4.0 2.3 2.2 3.0 4.1 3.4 4.9 3.4 5.0 5.0...

  • Page 39: Micon Schematic Diagram

    MICON SCHEMATIC DIAGRAM (SYSCON PCB) FROM/TO POWER DEGAUSS_H SERVICE C1056 R1032 10K TP1001 0.1 B POWER_FAIL2 C1041 P.CON+5V C1044 AT+12V 0.1 B MOTOR_GND 220P CH C1034 FROM/TO Y/C/AUDIO/HEAD AMP C1045 TV_POWER_H 0.1 F SP-H R1029 220P CH C1035 H.SW 4.7K 200P CH DOC_XO_CTL REC/EE/PB...

  • Page 40: In/Out Schematic Diagram

    IN/OUT SCHEMATIC DIAGRAM (SYSCON PCB) W918 L1002 100uH Vout OS1001 GP1U281Q FROM/TO SOUND AMP R1057 R1058 R1059 R1060 SOUND_GND 1.5K SOUND+ SP_OUT FROM CHROMA/IF R1062 R1065 R1067 R1068 R1069 AT+5V 5.6K 2.7K 1.5K INT-MONI FROM/TO MICON B.OUT IIC_OFF T-REC LED SW(TO) Q4202 DTC114EKA TV POWER SW(TO)
  • Page 41 CHROMA/IF SCHEMATIC DIAGRAM (SYSCON PCB) 11.0 FROM/TO MICON REG. R632 Q606 220 2W AT+5V REG. 2SD863 Q603 AT+5V D608 2SC2120Y AT+5V_BACKUP REG. REG. SB10-03A3 Q602 REG. Q605 2SC2120Y Q604 OSD_R 2SD400E 2SD400E OSD_G OSD_B R629 OSD_BLK W876 C692 R662 330P CH W894 TU_VIDEO B604...

  • Page 42: Sound Amp Schematic Diagram

    SOUND AMP SCHEMATIC DIAGRAM (SYSCON PCB) FROM/TO IN/OUT CP352 CD353 B2B-EH-A CH12426A SPEAKER SP_OUT SP_OUT SOUND_GND SOUND+ SOUND_GND SP351 810-47-171 8 OHM FROM MICON R359 TV_A_MUTE R353 TV_POWER_H C301 0.0047 FROM POWER SOUND+B W803 SOUND_GND FROM CHROMA/IF S107X C355 R357 AUDIO_OUT 5.6K AUDIO SIGNAL(REC)

  • Page 43: Power Schematic Diagram

    POWER SCHEMATIC DIAGRAM (SYSCON PCB) 5A 125V 4A 125V CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE FUSE 5A 125V (F501,ICP501,ICP502,ICP503), AND 4A 125V(ICP505). ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQUES D’INCEIE N’UTILISER QUE DES FUSIBLE DE MEME TYPE 5A 125V (F501,ICP501,ICP502,ICP503), ET 4A 125V(ICP505).

  • Page 44: Deflection Schematic Diagram

    DEFLECTION SCHEMATIC DIAGRAM (SYSCON PCB) V.OUTPUT IC IC401 LA78040 THERMAL PROTECTION PUMP UP 25.9 12.5 26.3 DRIVER Q402 KTA1281_Y D402 26.0 26.0 RMPG06J C404 25.0 TO DY 500V 470P R401 CP401 B05B-DVS W857 S104X R413 R416 W830 FROM MICON 1.8K R424 TV_POWER_H 2.2K 1/2W...

  • Page 45: Crt Schematic Diagram

    CRT SCHEMATIC DIAGRAM (CRT PCB) 126.5 104.1 127.5 127.5 TP801 R802 BLUE AMP Q804_1 J801_1 2SC4217 132.5 12K 1W HPS3200-010501 R807 2.7K 1/4W FROM CHROMA/IF CP851B (CP851A) 51048-1000 R811 CUT_OFF 4.7K CUT_OFF C809 TP802 G.OUT G.OUT B.OUT 680P B B.OUT R805 GREEN AMP R.OUT...

  • Page 46: Operation Schematic Diagram

    OPERATION SCHEMATIC DIAGRAM (OPERATION PCB) HEADPHONE_JACK J351 HTJ-035-28A R350 R351 1/2W 1/2W FROM/TO IN/OUT W805 CD351_1 (CP353) CH27091A FRONT_VIDEO_IN FRONT_A_IN_L L004 SOUND_GND HF57T18.5*10*10 SOUND_OUT_L SP_OUT_L POWER/PLAY R761 270 1/4W D792 SLZ-936C-07-S-T1 C701 0.001 FROM IN/OUT VIDEO AUDIO L CD352 (CP354) FRONT AV JACK J701_1 CH25093A...

  • Page 47: Deck Schematic Diagram

    DECK SCHEMATIC DIAGRAM (DECK PCB) LOADING MOTOR M101 S105 BOT SENSOR S106 Q101 RPT-38PB113 S101 S102 S103 S104 FROM/TO MICON CP101 52044-0445 LDM+ LDM- PCB550 VE8851 CAUTION: SINCE THESE PARTS MARKED BY ATTENTION: LES PIECES REPAREES PAR UN ETANT NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE: THE DC VOLTAGE AT EACH PART WAS CRITICAL FOR SAFETY,USE ONES...

  • Page 48: Interconnection Diagram

    INTERCONNECTION DIAGRAM OPERATION PCB HEADPHONE JACK PCB030 J351 TE9A16 FRONT AV JACK J701 HALL MAIN ROTOR SENSOR COIL MAGNET FG SENSOR HALL HALL L005 L004 SWITCH LOGIC CP1004 SPEAKER CD353 CP352 MOTOR_GND SP_OUT I LIMIT SOUND_GND SP351 8 OHM CAP/M/F/R CAPSTAN DD UNIT ASS’Y VCC(5V) DECK MECHA ASS’Y...
  • Page 49 WAVEFORMS Y/C/AUDIO/HEAD AMP 1 REC/PB REC/PB 11 REC/PB 0.5V 20µs/div 1V 5ms/div 1V 10ms/div SOUND AMP 12 200mV 0.1ms/div 2 REC/PB 7 REC/PB 100mV 0.5µs/div 1V 50ns/div POWER 3 PB REC/PB 13 REC/PB 100mV 5ms/div 1V 10ms/div 5V 0.1ms/div 4 REC 9 PB 14 REC/PB 20V 10µs/div...
  • Page 50 WAVEFORMS 16 1V 10ms/div 21 20.0V 20µs/div 17 5V 20µs/div 18 0.5V 20µs/div 19 20.0V 20µs/div 20 20.0V 20µs/div NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.

  • Page 51: Mechanical Exploded View

    MECHANICAL EXPLODED VIEW J801 PCB110 (CRT PCB) L503 V801 PCB030 (OPERATION PCB) SP351...
  • Page 52 MECHANICAL EXPLODED VIEW FB401 PCB800 (SYSCON PCB)

  • Page 53: Chassis Exploded View (Top View)

    CHASSIS EXPLODED VIEW (TOP VIEW) M2003 UN4001 H5001 H5002 M101 PCB550 (DECK PCB ASS'Y) NOTE: Applying positions AA and BA for the grease or CLASS MARK oil are displayed for this section. GREASE Check if the correct grease or oil is applied for each position.

  • Page 54: Chassis Exploded View (Bottom View)

    CHASSIS EXPLODED VIEW (BOTTOM VIEW) M2001 NOTE: Applying positions AA and BA for the grease or CLASS MARK oil are displayed for this section. GREASE Check if the correct grease or oil is applied for each position.

  • Page 55: Mechanical Replacement Parts List

    MECHANICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description BZ610132 A550A4A720 CABINET,FRONT ASS'Y BZ710248 752WSAA028 SHIELD,BOTTOM BZ710328 752WSA0209 SHIELD,CASE HEAD AMP BZ710235 753WSA0120 PLATE,BOTTOM-EARTH BZ710304 753WSA0131 SHIELD,COVER HEAD AMP BZ710329 761WPAA045 HOLDER,DECK BZ710251 800WFA0037 CUSHION 15x5xT=6 BZ710252 800WFA0038 CUSHION 10x10xT=2 BZ710178...

  • Page 56: Chassis Replacement Parts List

    CHASSIS REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description BZ610096 A550A3A420A DECK ASSY A550A3A420A BZ710073 85OA500022 AHC ASS'Y BZ710193 85OP200290 BELT,CAPSTAN (S) BZ710132 85OP900710 LEVER,REC BZ710094 85OP500083 BASE,AC HEAD BZ710112 85OP800324 SPRING,AC HEAD BZ710194 85OA000367 MAIN CHASSIS ASS'Y (S-Z) BZ710195 85OA200082 CLUTCH ASS'Y(S2)
  • Page 57 CHASSIS REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description BZ710048 8107126A04 SCREW,TAP TITE(S) PAN 2.6x10 BZ710049 8107226804 SCREW,TAP TITE(S) BIND 2.6x8 BZ710017 8107226604 SCREW,TAP TITE(S) BIND 2.6x6 BZ710050 8109126604 SCREW,TAP TITE(B) PAN 2.6x6 BZ710052 810A126804 SCREW/WASHER(A) M2.6x8 BZ710053 810B126404 SCREW/WASHER(B) M2.6x4...

  • Page 58: Electrical Replacement Parts List

    ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description RESISTORS ! R415 BZ210069 R426T22R2F R,METAL 2.2 OHM 1/2W ! R420 BZ210070 R801R7822F 8.2K OHM 1/10W R422 BZ210071 R3X28B4R7J R,METAL OXIDE 4.7 OHM 3W ! R439 BZ210072 R801R7223F 22K OHM 1/10W ! R440 BZ210073 R801R7513J...
  • Page 59 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description DIODES ! D517 BZ410011 D28TELS2N2 DIODE,RECTIFER 10ELS2N-TA1B2 D518 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 ! D519 BZ410010 D28T21DQN9 DIODE,SCHOTTKY 21DQ09N-TA2B1 D521 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D523 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D528 BZ410021 D97U05R61B DIODE,ZENER...
  • Page 60 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS ! Q805 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC ! Q806 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC Q1001 BZ410049 0002700590 PHOTO COUPLER RPI-301 Q1002 BZ510002 T8YJ2412K0 TRANSISTOR,SILICON 2SC2412KT146 R,S Q1003 BZ410071 0002M00610 PHOTO COUPLER SG-276 Q1004 BZ510021...
  • Page 61 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description MISCELLANEOUS B403 BZ310016 024AT03655 CORE,BEADS BL01RN1-A63T6 B502 BZ310015 024AT03482 CORE,BEADS BL02RN2-R62T4 B503 BZ310016 024AT03655 CORE,BEADS BL01RN1-A63T6 B505 BZ310015 024AT03482 CORE,BEADS BL02RN2-R62T4 B602 BZ310045 024AT03481 CORE,BEADS BL02RN1-R62T2 B604 BZ310045 024AT03481 CORE,BEADS BL02RN1-R62T2 BL001...
  • Page 62 TOSHIBA VIDEO PRODUCTS PTE. LTD. 438B ALEXANDRA ROAD, BLOCK B #06-01 ALEXANDRA TECHNOPARK SINGAPORE 119968...

Table of Contents