Table of Contents
Advertisement
1
Press the MENU button to
display OSD menu.
2
Press the
select RESET menu.
3
To enter the sub-menu
setting, press the
or the MENU button.
4
Press the
YES if you want to restore all projector settings to the factory
defaults.
5
Press the
6
To exit from the current menu, toggle the MENU button.
Other Related OSD Menus
Following are the descriptions on the on-screen display menus with
video input sources and without input source attached to your
projector.
Video Input Signal
If the input signal comes from S-Video, composite video or component
video (YCbCr), you may see VIDEO menu interface.
Video Menu
This menu enables you to adjust the video format settings, brightness,
contrast, saturation, tint and sharpness. Changing settings procedure
(using either the Projector Control Panel or the Remote Controller):
1
Press the MENU button to
display OSD menu.
2
Press the
select VIDEO menu.
3
To enter the sub-menu
setting, press the
or the MENU button.
4
Press the
select the submenu item.
Downloaded From projector-manual.com Acer Manuals
or
button to
button
or
to select
button to confirm the selection.
or
button to
button
or
button to
25
Advertisement
Table of Contents
