Инструкция для Acer P7203 Перейти в карточку товара 8 800 775 98 98...
Acer Projector P7203/P7205/P7200i Series User's Guide...
Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
• To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.
Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.
Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level after your ears have adjusted. • Do not listen to music at high volumes for extended periods. •...
viii First things first Usage Notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom How to get a preferred image position by adjusting lens shift User Controls Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Management Setting Audio...
Timer Language Appendices Troubleshooting LED & Alarm Definition Listing Cleaning and replacing the dust filters Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices...
True 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio supported • Manual lens shift adjustment • Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images • High brightness and contrast ratio • Versatile display modes (Bright, Presentation, Standard, Video, User) enable optimum performance in any situation •...
Composite video cable DVI-D Cable 3RCA conponent cable Security card 2 x User's Guide (Wireless CD Remote control for P7200i) Acer Projector Quick Start Guide 2 x Quick start guide 2 x Battery 1 x Wireless antenna (Wireless Quick Start Guide (P7200i)
Rear side 10 11 12 13 14 22 23 24 25 Power socket 12V DC output connector USB ctrl connector PC analog input connector (VGA IN 2) Audio input 2 connector (VGA IN 2/ HDMI 1 connector DVI) HDMI 2 connector YPbPr/YCbCr input connector DVI input connector (for digital signal Wired IR remote input connector...
OSD menu operation or exit the OSD menu. • Confirm your selection of items. See the contents in " POWER " section. Unique Acer functions: eOpening, eView, eTimer, Empowering key ePower Management. TEMP Temp Indicator LED Use to select items or make Four directional select keys adjustments to your selection.
Infrared Sends signals to the projector. transmitter Laser pointer Aim the remote at the viewing screen. POWER Refer to the " " section. HIDE Momentarily turns off the video. Press to hide the image, press again to display the image. FREEZE To pause the screen image.
Right Click respectively; the center button works as a multidirectional pointer stick. To enable this function, an USB cable must be connected to projector from your PC. Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower Management. VOLUME Increases/decreases the volume.
Connecting the Projector DVD player, Set-top Box, HDTV receiver Video Output S-Video Output DVD player R B G DVI-D HDMI RS232 D-Sub RS232 R B G HDMI HDTV adapter DVI-D D-Sub D-Sub DVD player, Set-top Box, D-Sub HDTV receiver Intrnet 1 Power cord 10 Composite video cable 2 USB cable...
Connecting the Projector for Wireless Function WLAN Internet 1 Power cord 2 LAN cable 3 Antenna For P7200i only...
Remove the lens cap.(Illustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing " " button on the control panel, and the Power indicator LED will turn blue.(Illustration #2) Turn on your source (computer, notebook, video player ,etc.).
To turn the projector off, press the power button. This message appears: Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.
The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Raise the image to the desired height angle (Illustration #1), then pull out the stand feet into position. Use Tilt adjusting wheel (Illustration #2) to fine-tune the display angle. Use Lens shift control rings to move the image to the ideal position.
Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 65"...
Screen size Screen size Desired (Min zoom) (Max zoom) Distance From base From base to Diagonal Diagonal to top of top of image <A> (inch) W (cm) x H (cm) (inch) W (cm) x H (cm) image (cm) (cm) <B> <B>...
How to get a preferred image size by adjusting distance and zoom Height Form base to top of image 1.6 m 2.4 m Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50" set the projector at a distance 1.6 m and 2.4 m from the screen and adjust the zoom level accordingly.
Top (cm) Screen size Distance (m) Diagonal From base to top of Max zoom Min zoom (inch) W (cm) x H (cm) image <B> <C> <A> <D> 61 X 46 81 X 61 102 X 76 122 X 91 142 X 107 163 X 122 183 X 137 203 X 152...
The projector is equipped with lens shift for adjusting the position of projected image right and left or up and down without requiring you to physically move the projector. Vertical Lens Shift ring Horizontal Lens Shift ring The figures shown in this section are for reference only not approximate value.
Adjusting the horizontal or vertical image position The vertical image height can be adjusted between -5% and 20% of the image height. (The minimum vertical image offset is fixed at -5% of the image height above the centre of the projector lens.) With the lens in the centre position the horizontal image position can be adjusted to the left or right by up to a maximum of 15% of the image width.
The maximum shift of vertical (horizontal) image adjustment can be limited by horizontal (vertical) image position. Please refer below diagram. 115%(V), 0%(H) 7.5%(H) -7.5%(H) 105%(V) -15%(H) 95%(V) 15%(H) H x 15% H x 15% V x 20% Offset max= V x 15% Offset min= V x 5% ZOOM LAMP...
Acer Empowering Key provides four Empowering Acer unique functions, they are "Acer eView Management", "Acer eTimer Management", "Acer eOpening Management" and "Acer ePower Management" respectively. Press " " key for more than one second to launch the Onscreen display main menu to modify its function.
The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press on the remote control or control panel. • When the OSD is displayed, use the keys to select any item in the main menu.
Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing video in a bright environment. • User: Memorize user's settings. Wall color Use this function to choose a proper color according to the wall.
Tint Adjusts the color balance of red and green. • Press to increase the amount of green in the image. • Press to increase the amount of red in the image. "Saturation" and "Tint" functions are not supported under computer or HDMI mode.
Keystone Adjust image distortion caused by tilting projection. (±40 degrees) H Keystone Press the to adjust image distortion horizontal and makes a squarer image. V Keystone Press the to adjust image distortion vertical and makes a squarer image. H. Position •...
ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector.
Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Screen Capture Use this function to customize the startup screen.
Administrator Password is. • If losing this security card and number, please contact with an Acer service center. • Default Lock User Startup Screen is "OFF". If lock user startup screen is "ON", users cannot change startup screen anymore and avoid other users change that arbitrarily.
• Default is "Off". Choose "On" to enable LAN connection. (for P7203/P7205 only) LAN IP/Mask • Identify IP and Mask address. (for P7203/P7205 only) LAN Reset • Reset LAN function. (for P7203/P7205 only) WiFi/LAN • Default is "On". Choose "Off" to disable Wireless / LAN connection.
Timer Location • Choose the location of the timer on the screen. Timer Start • Press to start or stop the timer. Timer Period • Press to adjust the timer period. Timer Volume • Select this function to adjust the notification volume when the timer function is enabled and time is up.
Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Connected as described in the "Getting Started"...
Partial, scrolling • Press "RESYNC" on the remote control or control or incorrectly panel. displayed image • For an incorrectly displayed image: (for notebooks) • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings.
Image is too small • Adjust the zoom ring on the top of the projector. or too large • Move the projector closer to or further from the screen. • Press "MENU" on the remote control or on the control panel. Go to "Image --> Aspect Ratio" and try different settings.
OSD Messages Condition Message Reminder Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please also check the dust filters if they are installed.
LED & Alarm Definition Listing LED Messages Lamp LED Temp LED Power LED Message Blue Standby (power cord plugged in) Power button ON Lamp retry Quick flashing Turning off Quick (cooling state) flashing Turning off (cooling completed) Error (thermal failure) Error (fan lock failure) Quick flashing...
Cleaning and replacing the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: Turn the projector off.
Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message " " When you see this message, change the lamp as soon as possible.
Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Screws are not included. Please obtain the appropriate screws for your type of ceiling.
Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Smaller Washer Large Washer Projector Bracket Supports projector and allows - for adjustments Spacer - For heat dissipation It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.
Adjust the angle and positioning as necessary. Tightening Screw Allen Key Allen Key Tightening Screw The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Screw Type B Washer Type...
Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system ® Resolution Native: XGA (1024 x 768), Maximum: UXGA (1600 x 1200),WSXGA+ (1680 x 1050), 1080p (1920 x 1080)
I/O connectors • Power socket x1 • VGA input x2 • Composite input x1 • S-Video x1 • VGA output x1 • HDMI x2 • DVI-D x1: with HDCP support • RS232 3-pin min dim jack x1 • USB ×4 •...
Compatibility modes A. VGA Analog VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 640x480 31.50 640x480 37.90 640x480 37.50 640x480 43.30 720x400 31.50 720x400 37.90 SVGA 800x600 35.10 800x600 37.90 800x600 48.10 800x600 46.90 800x600 53.70 832x624 49.725 1024x768 48.40...
1152x870 68.68 1280x960 75.00 i Mac DV (G3) 1024x768 60.00 VGA Analog - Extended Wide timing Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 47.8 1280x768 60.3 1280x768 68.6 1280x720 44.772 1280x800 49.643 1440x900 59.9 1680x1050 65.290 B. DVI Digital DVI - PC Signal Modes Resolution...
QuadVGA 1280x960 60.0 1280x960 75.23 SXGA+ 1400x1050 65.3 UXGA 1600x1200 75.00 Power Mac G4 640x480 66.6(67) 34.93 800x600 37.90 1024x768 48.40 1152x870 68.68 1280x960 75.00 PowerBook G4 640x480 31.35 640x480 66.6(67) 34.93 800x600 37.90 1024x768 48.40 1152x870 68.68 1280x960 75.00 i Mac DV (G3) 1024x768 60.00...
DVI - Video Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] For TWN/USA SKU 480i (NTSC) 720x480(1440x480) 59.94(29.97) 15.734 480p (NTSC) 720x480 59.94 31.469 720p (NTSC) 1280x720 44.955 1080i (NTSC) 1920x1080 60(30) 33.716 1080p (NTSC) 1920x1080 67.432 For EMEA SKU 576i (PAL) 720x576(1440x576) 50(25) 15.625...
Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification...
Taipei Hsien 221, Taiwan Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:firstname.lastname@example.org And, Acer Europe SA Via Cantonale, Centro Galleria 2 6928 Manno Switzerland...
-. EN301 489-1 -. EN301 489-17 Article 3.2 Spectrum Usages -. EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2010. Apr. 1, 2010 _______________________________ Easy Lai /Manager Date Regulation Center, Acer Inc.
Acer America Corporation 333 West San Carlos St., San Jose CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the...