Dell latitude X1 User Manual page 46

NOTE: An asset tag can have up to 10 characters; any combination of characters excluding spaces is valid.
7. When the computer prompts you to verify the asset tag, type y.
The computer displays the new or modified asset tag and the Service Tag.
8. Restart your computer to exit the Asset Tag utility.
Viewing Existing Asset and Service Tags
1. Boot the computer using the bootable floppy disk you created in
2. Type asset and press <Enter>.
Deleting an Asset Tag
1. Boot the computer using the bootable floppy disk you created in
2. Type asset /d and press <Enter>.
3. When the computer prompts you to delete the asset tag, type y.
Assigning an Owner Tag
An owner tag can have up to 48 characters; any combination of letters, numbers, and spaces is valid.
1. Boot the computer using the bootable floppy disk you created in
2. Type asset /o and a space followed by the new owner tag, and press <Enter>.
For example, type the following command line and press <Enter>:
asset /o ABC Company
3. When the computer prompts you to verify the owner tag, type y.
The computer displays the new owner tag.
Deleting an Owner Tag
NOTE: For security, you cannot set, change, or delete the owner tag if the primary or administrator passwords are set.
1. Boot the computer using the bootable floppy disk you created in
2. Type asset /o /d and press <Enter>.
3. When the computer prompts you to delete the owner tag, type y.
Asset Tag Options
To use one of the asset tag options (see the following table):
1. Boot the computer using the bootable floppy disk you created in
2. Type asset and a space followed by the option, and then press <Enter>.
Asset Tag Option
Downloaded from LpManual.com Manuals
"Assigning an Asset Tag."
"Assigning an Asset Tag."
"Assigning an Asset Tag."
"Assigning an Asset Tag."
"Assigning an Asset Tag."
Description