Date & Time - HP Photosmart R717 User Manual

Date & Time
This setting allows you to set the date/time format, as well as
the current date and time for the camera. This is usually
done when you first set up the camera; however, you may
need to re-set the date and time when you are travelling to
different time zones, after the camera has been without
power for an extended time, or if the date or time is
incorrect.
The date/time format chosen will be used to display the date
information in Playback. Also, the format chosen in this
setting is what is used in the Date & Time Imprint feature (see
Date & Time Imprint on page 85).
1. In the Setup Menu (page 121), select Date & Time.
2. In the Date & Time sub-menu,
adjust the value of the
highlighted selection by using
the buttons.
3. Press the
the other selections.
4. Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5. Press the
Setup Menu.
The new setting remains in effect until it is changed again,
even when you turn the camera off.
The Date & Time settings also remain current as long as the
camera battery that is installed has a charge, or the battery
is removed for less than 10 minutes, or the camera is
connected to an optional HP AC power adapter.
Downloaded from ManualsCamera.com Manuals
HP Photosmart R717 User's Manual
128
buttons to move to
button to save the setting and return to the