Specifications; Specific Safety Rules - Makita HR4002 Instruction Manual

ENGLISH
1-1. Switch trigger
2-1. Lock button
3-1. Change lever
3-2. Pointer
3-3. Lock button
5-1. Side handle
5-2. Clamp nut
6-1. Side grip

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for hammer drilling in brick, concrete
and stone as well as for chiselling work.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-6:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 2 m/s
Work mode : hammer drilling into concrete, 20: mm
diameter and 180 mm depth
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
7-1. Bit shank
7-2. Bit grease
8-1. Bit
8-2. Chuck cover
9-1. Bit
9-2. Chuck cover
10-1. Pointer
10-2. Change lever
Model
Carbide-tipped bit
Core bit
-1
)
Overall length
Net weight
Safety class
) : 93 dB(A)
pA
) : 104 dB(A)
WA
value (tri-axial vector
2
) : 10.5 m/s
h,CHeq
2
2
) : 17 m/s
h,HD
2
ENE044-1
EC-DECLARATION OF CONFORMITY
Model; HR4002
We declare under our sole responsibility that this
ENF002-1
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
ENG102-1
000230
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
ENG215-1
8JD, ENGLAND
sum)

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to rotary hammer safety rules. If you use this tool
ENG303-1
unsafely or incorrectly, you can suffer serious
personal injury.
1. Wear ear protectors. Exposure to noise can
cause hearing loss.
3
10-3. Lock button
11-1. Pointer
11-2. Change lever
11-3. Lock button
12-1. Depth gauge
12-2. Clamp screw
12-3. Grip base
14-1. Blow-out bulb
HR4002
40 mm
105 mm
680
2,500
458 mm
6.2 kg
/II
CE2007
Tomoyasu Kato
Director
ENH101-8
GEB007-2