Disconnecting the USB cable
To avoid computer malfunctions, always do the following when removing the
USB cable. If a malfunction occurs, disconnect the USB cable and re-connect
it and/or re-start your personal computer.
Windows 98/98 SE
1
Make sure the camera's card access
lamp is off.
2
Select the "Removable Disk" icon
on "My Computer" and right-click to
display the menu.
3
Select "Eject" and left-click.
4
Make sure the camera's access
lamp is off, then remove the USB
cable.
Macintosh
1
Make sure the camera's card access
lamp is off.
2
Drag & drop the "Untitled" icon onto
the "Trash" icon on your desktop, or
select "Eject" from the "Special"
menu.
3
Make sure the camera's access
lamp is off, then remove the USB
cable.
OK
Card access lamp
179