Samsung np-q1ex User Manual page 172

To connect the headset to another
Bluetooth device such as a PC or cell
phone, the headset must be in Pairing
mode.
Switch the headset to Pairing mode
and then retry the search operation.
In general, the headset in Pairing
mode automatically returns to On/Off
mode after a certain period of time.
There is no sound or sound is
Q
intermittently interrupted after
connecting a headset.
A1 If a Bluetooth headset is connected to
a PC, the Sound playback device in
the Control Panel is to be changed
to Bluetooth SCO Audio (for a mono
headset) or Bluetooth AV Audio
(for a stereo headset). If the Sound
playback device in the Control
Panel is not changed properly,
there may be no sound through the
headset. Check the audio settings of
the Control Panel according to the
procedures given below.
Configuring the Audio Device in
the Control Panel
z Click Start > Control Panel and
double-click on Sound and Audio
Devices.
x Select the Audio tab in the Sound
and Audio Devices Properties
window.
c Check if the Sound playback device
and the Sound recording device are
set to Bluetooth SCO Audio (for
a mono headset) or Bluetooth AV
Audio (for a stereo headset).
A2 Check if the headset is properly
connected and working properly.
A3 Check the volume level of the headset
and PC.
A4 When running a multimedia program
such as Windows Media Player that
accesses the audio device, a headset
may not be properly connected or
used. To resolve this problem, exit
the multimedia program, connect
the headset and then launch the
multimedia program again.
172