Q & A
This section provides information on possible problems, solutions and other references
for using the system.
Display Related
The LCD screen is too dark or too
Q
bright.
A Adjust the LCD brightness.
Press the Wheel button to run the
MENU program and click
Brightness.
The screen saver disturbs Media
Q
Player playing a movie or video clip
after the screen saver is activated
while Media Player is playing.
A Unselect Tools > Options > Player
> Allow screen saver during
playback in the Media Player.
In the following cases, the screen
Q
blinks or displays noise for a short
time.
Click the Graphics Related tab,
Change Resolution, Change
of
Display Device, Remove the AC
Adapter, Restart the System,
Change Power Scheme.
A This may happen while the video
driver is examining the connected
device. While busy detecting, any
connected display devices may blink
or some noise may occur.
161