Samsung np-q1ex User Manual page 163

I've run the Rotation function from
Q
the Menu, and the pointer on the
screen does not correspond to the
pointer position.
A It is recommended using an external
USB mouse when the screen is
pivoted.
If the above problem appears,
complete the following steps.
z Right-click on the eGalax Touch
icon from the Taskbar and confirm
that the Display Pivot Support
function is selected (V). If it is not
selected, select it by selecting the
Display Pivot Function.
If you cannot find the TouchKit
icon on the Taskbar, click Start >
All Programs > eGalax Touch >
TouchMon.
x Click on Start > All Programs >
eGalax Touch > Configure Utility
and click on 4-Point Calibration
from the Tools tab. If the Stylus Pen
Calibration screen appears, proceed
according to the instructions on the
screen.
Organizer Related
When I connect an external
Q
display and change the settings
to display the screen image on
both the LCD and the external
display by pressing the Fn +
key combination, the screen is not
displayed properly.
A Press Fn +
again. If the screen is still not
displayed or only part of the screen
is displayed by doing this, that means
the LCD resolution is too low or too
wide and the external display support
the resolution. Right-click over the
Desktop, select Properties, select
the Settings tab and change the
resolution to 800 x 600.
The Taskbar on the bottom of the
Q
screen does not appear when a
projector is used as the display
device.
A This may happen, if the projector
does not support LCD resolution. In
this case change the resolution to
800 x 600 (recommended) on your
computer.
163
key combination