Using The Remote Control To Take Pictures - Olympus Camedia C-3040Zoom Instructions Manual

Using the remote control to take pictures

P A/S/M
1
Set the camera on such as
a tripod and compose the
shot.
When you point the remote
control at the remote control
receiver on the camera and
press the W or T button on the
remote control, you can use the
zoom. The self-timer/remote
control lamp on the camera
flashes during zooming.
2
When you press the shutter
button on the remote control,
the self-timer/remote control
lamp on the camera flashes
for 3 seconds and then the
shutter releases.
If the self-timer/remote control
lamp does not flash when you
press the shutter button, move
closer to the camera and press
it again. (Radio wave interfer-
ence can prevent the lamp
from flashing. If this occurs,
change the channel as direct-
ed in the instructions for the
remote control.)
See P.146 for information on using the remote control to play back images.
In very bright conditions, such as in sunlight, the effective range of the
remote control is reduced.
Do not shine bright lights directly at the remote control receiver.
Self-timer/remote control mode is not cancelled after you take a picture.
Using the self-timer and remote control
Self-timer/remote
control lamp
15
15
16.4 ft
2
remote control receiver
4
117