Olympus Camedia C-3040Zoom Instructions Manual page 108

Setting the color tone (Quick Reference White Balance)
5
Place a sheet of white paper
under the light source so that
the light strikes the paper (or
get someone to hold the
paper). Then frame the shot
so that the illuminated paper
fills the screen and press the
[OK] button.
The white balance is registered
and you can use the monitor to
4
check whether the new setting is
effective.
Press the [OK] button repeat-
edly until the correct setting is
achieved.
6
Press the
to exit the Quick Reference
white balance registration
screen.
To reset the white balance again,
repeat the procedure from step 4.
To cancel Quick Reference
white balance, select "AUTO"
and press the [OK] button.
You can still take pictures at this
point.
7
Press the [OK] button.
8
Press the [OK] button again
to save the setting and exit
Menu mode.
When Quick Reference White
Balance is set, "
on image information screen in
Playback mode. (P.148)
If you cannot distinguish the adjustment, always view your shot on the mon-
itor to check the color tones.
Use the AUTO setting for normal shots.
Unless you select "OFF" in the "ALL RESET" setting (P.175), this setting will
108
be cancelled when you switch the camera off.
(Menu) button
" is displayed
5 7 8 6
When still picture playback screen
is displayed. (INFO-ON)
SIZE:2048 1536
F2.0 1/800 +2.0
12.23. , 00 21:56
FILE:123-3456
10
HQ
ISO400