Care & Maintenance - Whistler XP100i Owner's Manual

Table of Contents

Advertisement

In Review.
• Never attempt to operate the inverter from any power
source other than a 12-volt DC battery.
• The inverter is designed to be connected to the lighter
socket or power port with the 12-volt power plug. Do not
attempt to modify the power plug.
• While connecting the inverter to the power source, make
certain that there are non-flammable fumes or gases in
the vicinity.
• Don't expose the inverter to rain or moisture.
• Make certain the power consumption of the appliance or
equipment does not exceed 100 watts.
• To avoid battery drain, always disconnect the inverter
when not in use.
• Avoid placing the inverter near sources of heat or in
direct sunlight.
• While in use, make sure the inverter is properly ventilated.
• When operating the inverter with an automobile or
marine battery, start the engine every 30 to 60 minutes
and let it run for approximately 10 minutes to recharge
the battery.
CARE AND MAINTENANCE
11

Advertisement

Table of Contents
loading

Table of Contents