Acitivating/ Deactivating The Alarm; Activate/Deactivate Alarm In Standby Mode; Stopping The Alarm/ Snooze Function; Timer - Hama DR50 Operation Manual

Note
It is recommended to allow the radio to update the
time automatically. This ensures that the time is always
correct even if there is a separation of power supply –
for example a power cut.

8.2 Acitivating/ deactivating the alarm

• Confirm/ complete the alarm settings with On to activate
the alarm.
• Confirm/ complete the alarm settings with Off to
deactivate the alarm.

8.3 Activate/deactivate alarm in standby mode

• Press [alarm] in standby mode to display the current
alarm setting.
• Press [alarm] again or rotate [select / snooze /
- tune +] to activate/deactivate alarm 1 and/or alarm 2.
• Press [select / snooze / - tune +] to confirm your
settings.

8.4 Stopping the alarm/ Snooze function

• When the alarm activates, press [
- volume +] to stop the alarm.
• Repeatedly press [select / snooze / - tune +] to activate
snooze mode.
• The alarm turns off for the selected time interval (5/10
minutes) before activating once again.
• If the alarm is not stopped, the radio automatically
switches into standby mode after the selected time
interval (Duration).

9. Timer

The radio hast a sleep function, after a defined time the
radio switches to standby mode.
• Repeatedly press [select / snooze / - tune +] to set
standby /
• After the defined time the radio switches to standby
• Press [
12
the desired time interval (Sleep OFF/15/30/45/60/90
minutes).
2-3 sec.
mode.
standby / - volume +], to turn the radio back
on.
[info / menu]
System settings

Sleep