Sharp LC-13S1U Operation Manual page 37

ADJUSTMENTS (Continued)
SET UP
CH-SETT ING
CH SEARCH
AIR 2
eRETURN
BLUE SCREEN [OFF
J
LANGUAGE I>
[1J
CH-SETT INGI>
CLOCK
eRETURN
EZ SETUP I>
AI R/CABLEI>
[1J
CH SEARCHI>
CH MEMORYI>
MENU
ljJSLEEP TIMER
IIAV ADJUST
[lIPRESET I>
mlCLOSED CAPT 10NI>
rmV-CH IP BLOCK I>
I&~SET
UP
3
Press ...
1..
to move the cursor to
CH SEARCH, and press ENTER.
4
Press
~.
The tuner will search
through all available channels in
your area and add them to the TV
memory.
I
NOTE
>
• To interrupt CH SEARCH, press
~.
CH SEARCH will stop at the current
channel and will not add any higher
channels.
Saving broadcast TV channels in the memory
1
Press MENU to display the MENU
screen, press ...
1"
to move the
cursor to SET UP, and press
ENTER.
2
Press ...
1..
to move the cursor to
CH-SETTING, and press ENTER.
START:@ EXIT: •
CH MEMORY
AIR 2
CH MEMORY
AIR 2
TO ADD:@ EXIT:.
I
Press
~
I
Press ....
to add channel 2 to erase channel 2
to the TV memory from the TV memory
2
Press • ./.. to move the cursor to
CH-SETTING, and press ENTER.
3
Press ...
1..
to move the cursor to
CH MEMORY, and press ENTER.
4
Use ...
1"
or Channel Select to
select each desired channel to add
or erase.
S
Press
~
to add the channel to the
TV memory or press
~
to erase
the channel from the TV memory.
6
Press MENU to exit.
I
NOTE
>
• If CH SEARCH is performed again,
the previously memorized channels
will be lost.
MENU
Channel
Select
• Adding weak or additional channels or erasing unwanted channels from TV memory
1
Press MENU to display the MENU
CH-SETTING
screen, press ...
1..
to move the
eRETURN
EZ SETUP I>
cursor to SET UP, and press
AIR/CABLEI>
ENTER.
CH SEARCHI>
[1J
CH MEMORYI>
TO ERASE:@ EXIT:.