ADJUSTMENTS (Continued)
•
EZ SETUP
When you move to an area with different broadcasting signals the set will automatically memorize
the channel number and time by executing EZ SETUP again. Follow steps 1-3 below, select EZ
SETUP, and then go to step 3 on page 15.
•
SETTING THE AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV
programs.
SELECT:O
ENTER:.
EXIT:.
1
Switch the screen to TV mode and
press MENU to display the MENU
screen.
2
Press ..
IT
to move the cursor to
SET UP, and press ENTER.
3
Press ..
IT
to move the cursor to
CH-SETTING, and press ENTER.
I
NOTE
>
• When the screen is not in TV mode,
CH-SETTING is displayed in magenta
and not selectable.
4
Press ..
IT
to move the cursor to
AIRICABLE, and press ENTER.
5
Press ..
IT
to move the cursor to
the desired mode, and press
ENTER.
6
Press MENU to return to the main
screen.
MENU
~SLEEP
TIMER
IIAV ADJUST
gjPRESET
~CLOSED
CAPTI ONI>
ImV-CH IP BLOCK
[lJ'aSET UP
SET UP
8RETURN
BLUE SCREEN [OFF]
LANGUAGE
I>
[lJ' CH-SETT INGI>
CLOCK
SELECT:~
ENTER:.
CH-SETT ING
8RETURN
EZ SETUP I>
[lJ' AI R/CABLEI>
CH SEARCHI>
CH MEMORYI>
SELECT:~
ENTER:.
AIR/CABLE
8RETURN
[lJ' AIR
CABLE
SELECT:G
ENTER:.
EXIT: •
EXIT: •
EXIT:.
I
NOTE
>
• Receivable channels of your TV set are:
AIR channels:
VHF: 2 through 13.
UHF: 14 through 69.
CABLE channels:
1 (HRC and IRC)
2 through 125 (STD, HRC and IRC)