Switching Tvnideo [Av1/Av2/Componentitv] Modes - Sharp LC-13S1U Operation Manual

BASIC OPERATION (Continued)
I
NOTE
>
• The AV input mode indication remains
for 3 seconds. AV2 mode
• AV1: Video equipment connected to the
.----------A-V-2--,
AV-IN1 input terminals.
The S-video input terminal is
additionally provided for the AV-
IN1 input. If both the S-video
terminal and normal video
terminals are connected with
cables, the S-video input terminal
takes priority.
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
Playback from 480 progressive
output equipment is available.
1
Turn on the power of the con-
nected video equipment.
2
Press TVNIDEO and select the
applicable input source. The
screen displays AV1 , AV2, COM-
PONENT or TV mode each time
TVNIDEO is pressed.
AV1
12
COMPONENT
[]JSTEREO <ON AIR
SAP
MONO
AV1 mode
l
COMPONENT mode
TV mode
AV2 mode is used to adjust the
preset settings and IN or OUT
can be selected. AV2 indication is
not displayed when OUT is
selected. (For details on setting
AV2 IN/OUT, see page 30.)
The S-video input terminal is
additionally provided for the AV-
IN2 input. If both the S-video
terminal and normal video
terminals are connected with
cables, the S-video input terminal
takes priority, only when IN is
selected for S-video.
• AV2:
22@