Dcp - Clarion rdx665dz Owner's Manual

7
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
• If the FLIP DOWN PANEL IS kept open, the
DCP may drop due to vibration of the car.
ThiS results In damage to the DCP So close
the FLIP DOWN PANEL or remove the DCP
to store Into the case.
• The connector connecting the source unit
and the DCP IS an extremely Important part.
Be careful not to damage it by pressing on
it with fingernails, screwdrivers, etc.
Note:
• If the DCP IS dirty, wIpe off the dirt with
a
soft, dry
cloth only.
Attaching the DCP
1 Insert the right side of the DCP Into the source
unit.
2. Insert the left Side of the DCP Into the source
unit.
•
~I
4. Close the HOLD FLAP
HOLD FLAP
Be sure to close the HOLD FLAP for safety
when removing the DCP
I .• 111
3. Pull the DCP toward you and remove it.
2. Deeply push In OPEN button
[I]
to unlock
the FLIP DOWN PANEL.
*
If the FLI P DOWN PAN EL does not open fully,
gently open it with your hand.
Removing the DCP
1. Hold down POWER button
W
for 1 second
or longer to turn off the power.
The control panel can be detached to prevent theft. When detaching the control panel, store it In the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.