Setting The Zoom Lever; How To Switch The Power On - Olympus PT-022 Instruction Manual

Setting the Zoom Lever

When loading the digital
camera in the Case, fit the
projecting part of the zoom
lever of the digital camera into
the recessed part of the zoom
lever on the inside of the Case.
CAUTION
: • When loading the camera, confirm that the projecting
part of the zoom lever of the camera is properly set to the
recessed part of the zoom lever of the Case.
• When the setting is insufficient, the loading of the camera
becomes imperfect and it may not be possible to seal the
Case or zooming may not function. Insufficient sealing
will cause water leakage.

How to switch the power ON

The method of turning this product ON is variable depending on the
camera in use (C-760 Ultra Zoom/C-770 Ultra Zoom). See the
following procedures for details.
C-760 Ultra Zoom
1) Gently turn the power switch dial knob
clockwise until it stops.
2) Turn the power switch button clockwise
and, when a click sound is heard, press
the power switch button to turn the
camera ON.
Pressing the power switch button again
turns the camera OFF.
E-13