Setting The Zoom Lever; How To Use The Power Button - Olympus SP-310/SP350 Instruction Manual

Setting the Zoom Lever

When loading the digital camera in the Case, fit the projecting part of the
zoom lever of the digital camera into the recessed part of the zoom lever on
the inside of the Case.
CAUTION
: • When loading the camera, confirm that the projecting
part of the zoom lever of the camera is properly set to
the recessed part of the zoom lever of the Case.
• When the setting is insufficient, the loading of the
camera becomes imperfect and it may not be
possible to seal the Case or zooming may not
function. Insufficient sealing will cause water leakage.
How to Use the POWER
Button
Press the POWER button to
turn the camera ON/OFF.
CAUTION
: • When the digital camera is not used for about 3 minutes
while in the shooting mode, it enters the sleep mode
(standby status) and no operations are possible.
To cancel sleep mode (and return to operation status),
press the shutter button or any other button.
For details, refer to your digital camera's instruction manual.
POWER button
E-13