Attaching A Kensington-Style Cable Lock; Attaching A Cable Lock - Lenovo ThinkCentre M800 User Manual

Attaching a Kensington-style cable lock

You can use a Kensington-style cable lock to secure your computer to a desk, table, or other non-permanent
fixture. The cable lock connects to the security-lock slot at the rear of your computer. Depending on the type
selected, the cable lock can be operated with a key or combination. The cable lock also locks the buttons
used to open the computer cover. This is the same type of lock used with many notebook computers. You
can order such a cable lock directly from Lenovo by searching for Kensington at:
http://www.lenovo.com/support
Figure 7. Kensington-style cable lock

Attaching a cable lock

A cable lock can be used to secure devices, such as the keyboard and the mouse, by locking the device
cables to your computer. The cable lock connects to the cable-lock slots on the rear of your computer.
To install a cable lock, do the following:
1. Insert the clip 1 into the cable-lock slot
2. Pull the cables you want to lock through the dents in the cable lock.
3. Press the clip 2 into the cable-lock slot
Figure 8. Installing a cable lock
28
ThinkCentre M800 and M900 User Guide
4 .
3 until it snaps into position.