Yamaha FZ6-SS Assembly Manual page 5

EAA00060
UNPACKING
1. Remove the frame cover (1).
NOTE:
To remove the frame cover, cut the vinyl
bands around the cover using a cutter or
scissors.
2. Remove the carton boxes (2) and (3).
Remove the front wheel (4).
3. Remove the packing frame bolts (5) and
upper handlebar holders (6).
4. Remove the bolts (7).
5. Remove the packing frames (8). (Lift up
and then move to the side.)
NOTE:
Remove the bolts while holding the frame.
NOTE:
Before starting the assembly, check for
damaged or missing parts. Check both the
parts contained in the carton boxes and on
the motorcycle for damage, scratches, and
other defects.
–1–